Lantronix 900-691-R Network 2 wlan0 Link Status, Wlan Profiles, To View Network 2 Link Status

4: Network Settings

Using XML

Include in your file: <configgroup name = "Interface" instance = "wlan0">

To View Network 2 Interface Status

Using Web Manager

In Network Interface Status, you can view both the current operational settings as well as the settings that would take affect upon a device reboot.

To view current access piont (ap0) settings, go to Network on the menu and select wlan0 -> Interface -> Status.

Using CLI

To enter the WLAN command level: status -> WLAN

Using XML

Look for the status header: <statusgroup name = "Interface" instance = "wlan0">

Network 2 (wlan0) Link Status

This page shows status of a Link on the device.

To View Network 2 Link Status

Using Web Manager

To view network 2 link interface information, click Network on the menu and select wlan0 >

Link > Status.

Using CLI

To enter the WLAN command level: status -> WLAN

Using XML

Include in your file: <configgroup name = "Interface" instance = "wlan0">

WLAN Profiles

A WLAN profile defines all of the settings necessary to establish a wireless connection with an access point (in infrastructure mode). A maximum of four profiles can exist on the xPico Wi-Fi embedded device server at a time and only one profile may be active at any given time.

The xPico Wi-Fi device supports dynamic profiles. Dynamic Profiles are the ones created via QuickConnect.

xPico® Wi-Fi® Embedded Device Server User Guide 25