Lantronix 900-691-R Device Settings, File Manipulation, To Transfer or Modify File System Files

9: Maintenance and Diagnostics Settings

Using XML

Not applicable.

File Manipulation

The xPico Wi-Fi embedded device server allows for files to be deleted, moved, renamed, and uploaded via HTTP. Directories can be created, deleted, moved, and renamed.

To Transfer or Modify File System Files

Using Web Manager

To create a new file or directory, upload an existing file, copy or move a file, click File System in the menu and select Browse.

Using the CLI

To enter the File System command level: enable -> file system

Using XML

Not applicable.

Device Settings

The xPico Wi-Fi Device settings allow for rebooting the device, restoring factory defaults, and uploading new firmware.

Anytime you reboot the unit, this operation will take some time to complete. Please wait a minimum of 10-20 seconds after rebooting the unit before attempting to make any subsequent connections.

Device Management

	Table 9-2 Device Management Settings
System Settings	Description
Save	Any cached configuration changes are committed, so they will apply after a
	reboot. Without saving, cached configuration changes are lost after a reboot.
Reboot (button)	Reboots the device. When rebooted, your browser should be refreshed and
	redirected to the main status page after 30 seconds.
	Note: The redirect will not work as expected if the IP address of the devices
	change after reboot. After setting the configuration back to factory defaults,
	the device will automatically be rebooted. If Web Manager is access through
	SoftAP, your connection to SoftAP may be dropped when device reboots.
Factory Defaults (button)	Restores the device to the original factory settings. All configuration will be
	lost. The xPico Wi-Fi automatically reboots upon setting back to the defaults.
Firmware Upload (button)	Device will reboot to the Over-The-Air (OTA) firmware upgrade application to
	continue the operation.

xPico® Wi-Fi® Embedded Device Server User Guide 49