Lantronix 900-691-R manual To Configure Wlan Quick Connect, Wlan Profile Advanced Settings

4: Network Settings

WLAN Profile	Description
Security Settings
WPAX Passphrase	Select the password consists of up to 63 characters.
	Note: Lantronix recommends using a passphrase of 20 characters or more for
	maximum security. Spaces and punctuation characters are permitted. The
	passphrase input is not the same as ASCII input (as used on some products.)
	ASCII is translated directly into hexadecimal bytes according to the ASCII table,
	while a possibly larger passphrase is hashed into a key and provides better
	security through a larger range of key values. This configuration option becomes
	available only when suites, WEP, WPA or WPA2 are selected.
WPAx Encryption	Select one or more encryption types, listed from strongest to least strong. At least
	one selection will have to match the Access Points intended to connect with.
	 CCMP = Uses AES as basis and is the strongest encryption option.
	 TKIP = Uses WEP as the basis, but adds extra checks and variations for added
	protection.
	Note: In case the encryption settings on the Access Point(s) can still be chosen,
	the capabilities of the Access Point(s) and the other clients that need to use the
	network need to be taken into account.This configuration option becomes
	available only when suites WPA or WPA2 are selected.

Table 4-7 WLAN Profile Advanced Settings

WLAN Profile Advanced Settings	Description
TX Power Maximum	Specify the maximum transmission output power in dBm.
Power Management	Select to Enable or Disable power management, which reduces the
	overall power consumption of the xPico Wi-Fi unit, but can increase
	latency.
	 Enabled = allows the xPico Wi-Fi to turn off the receiver when it is
	idling.
	 Disabled = keeps the receiver on at all times.
Power Management Interval	Select number of beacons (100 msec interval) between 1 and 5. The
	above-mentioned latency can be up to this number “X” 100 msec.

WLAN Quick Connect

WLAN QuickConnect allows users to view and add up to four WLAN profiles from a list of up to 20 wireless devices sorted by RSSI. Details of the selected network are pre-populated, so little or no configuration is required by the user.

To Configure WLAN Quick Connect

Using Web Manager

To view or edit an existing WLAN Quick Connect settings, click QuickConnect on the menu.

Using CLI

Not applicable.

xPico® Wi-Fi® Embedded Device Server User Guide 28