Lantronix 900-558 manual Configuration Using XML

4: Configuration Using XML

Group Name	Group Item	Value Name	Value Options	Additional
				Information
ip filter	delete entries		enable, disable	If enabled, deletes
				any existing
				entries before
				adding “filter
				entry”.
	filter delete	ip address		Deletes a specific
				IP filter entry.
		net mask		Deletes a specific
				IP filter entry.
	filter entry	ip address		If configured, is a
				specific IP
				address.
		net mask		If configured, is a
				specific net mask.
line	name
(Attribute of
“instance” is a
number.)
	interface		rs232, rs485 half-	Default:
			duplex, rs485 full-
			duplex
	termination		enable, disable	Default: disable
	state		enable, disable	Default: depends
				on instance
	protocol		none, modbus rtu,	Default:
			modbus ascii, tunnel,
			ppp, lpd, lpd or
			tunnel
	baud rate			Default: 9600 bits
				per second
	parity		even, none, odd	Default: none
	data bits		7, 8	Default: 8
	stop bits		1, 2	Default: 1
	flow control		none, hardware,	Default: none
			software
	xon char			Accepts a control
				character, for
				example,
				<control>
				A represents
				control-A Default:
				<control>Q

XPort Pro Command Reference 24