
| 5: Commands and Levels |
|
|
default max timeout | Restores the default Maximum Timeout between retrans- |
| missions. |
default send data | Sets TCP to send data in accordance with standards. |
exit | Exits to the configuration level. |
max retrans <number> | Sets the Maximum Retransmisssions. |
max retrans syn ack <number> | Sets the Maximum Retransmisssions for SYN/ACK. |
| It is lower than "Max Retrans" to thwart |
| attacks. |
max timeout <seconds> | Sets the Maximum Timeout between retransmisssions in |
| seconds. |
no clear counters | Unzeros TCP counters |
resets disable | Does not send TCP RSTs upon connection to unused |
| ports. |
resets enable | Sends TCP RSTs upon connection to unused ports. |
send data expedited | Sets TCP to send data whenever the window is sufficiently |
| open, for improved |
| |
send data standard | Sets TCP to send data in accordance with standards. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show statistics | Shows TCP statistics |
write | Stores the current configuration in permanent memory. |
telnet |
|
clear counters | Sets the Telnet counters to zero. |
clrscrn | Clears the screen. |
default max sessions | Could not find VarID 315 in file http/config/varid_help.mtxt |
default port | Restores the default local port to the Telnet server. |
exit | Exits to the CLI level. |
max sessions <number> | Could not find VarID 315 in file http/config/varid_help.mtxt |
no clear counters | Restores the Telnet counters to the aggregate values. |
port <number> | Sets the local port that the Telnet server uses. |
| <number> = local port number. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show statistics | Displays the Telnet statistics. |
state disable | Disables the Telnet Server. |
state enable | Enables the Telnet Server. |
write | Stores the current configuration in permanent memory. |
terminal 1 |
|
break duration <milliseconds> | Sets how long a break should last when it is being sent to |
| the line. |
| <milliseconds> = number of milliseconds. |
clrscrn | Clears the screen. |
default break duration | Restores the break duration to the default value (500 ms). |
default terminal type | Sets the default terminal type, "UNKNOWN". |
echo disable | Disables echoing of characters received on the line back |
| to the line. |
XPort Pro Command Reference | 114 |