
| 5: Commands and Levels |
|
|
modem control disable | Does not watch the modem control pin to disconnect. |
modem control enable | Watches the modem control pin and disconnects if it is not |
| asserted. |
no stop character | Removes the stop character. |
no timeout | Disables disconnect after timeout feature for tunneling |
| sessions. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
stop character <control> | Sets the stop character. |
| The character may be input as text, control, decimal, or |
| hex. |
| A control character has the form <control>C. |
| A decimal value character has the form \99. |
| A hex value character has the form 0xFF. |
timeout <milliseconds> | Disconnects when no data has been received on the line |
| (serial port) for the |
| specified length of time. |
| <milliseconds> = timeout in milliseconds. |
write | Stores the current configuration in permanent memory. |
dns (dns) level commands |
|
clrscrn | Clears the screen. |
exit | Exits to the enable level. |
lookup <host_or_ip> | Return a lookup on the DNS name or IP address. |
remove all | Removes all entries from the DNS Cache. |
remove host <host> | Removes an entry from the DNS Cache. |
show | Show DNS status and cache entries. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
email 1 (email:1) level commands |
|
auto show statistics | Continuously displays email statistics. |
cc <text> | Sets Cc addresses for email alerts. |
| <text> = a quoted, semicolon separated list of email ad- |
| dresses. |
clear log | Clears all entries from the mail log. |
clear mail counters | Sets the email counters to zero. |
clrscrn | Clears the screen. |
cp | Enters the next lower level. |
default local port | Sets the local port (used to send email alerts) to random. |
default priority | Sets |
default server port | Restores the factory default port for SMTP on the server |
| side. |
email <number> | Enters the configure email level. |
exit | Exits to the enable level. |
from <text> | Sets the From address for email alerts. |
| <text> = email address to place in the From field of the |
| email alert. |
local port <number> | Sets the local port used to send email alerts. |
| <number> local port to use for email alerts. |
message file <text> | Specifies a text file, the contents of which will be the mes- |
XPort Pro Command Reference | 59 |