Lantronix 900-558 Host 8 config-host8 level commands, Host 9 tunnel-connect-host19 level commands

	5: Commands and Levels
protocol udp aes	Uses UDP protocol with AES encryption for connect mode
	tunneling.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show statistics	show connection statistics
ssh username <text>	Sets the SSH user name for use when establishing tunne-
	ling connections
	with other devices.
	<text> = SSH user name.
tcp keep alive <milliseconds>	Enables TCP keep alive for connect mode tunneling and
	sets the timer.
	<milliseconds> = timer value, in milliseconds.
validate certificate disable	Skips verification of the server certificate when connecting.
validate certificate enable	Requires verification of the server certificate when con-
	necting.
vip disable	Makes connections using the specified Address.
vip enable	Makes connections using the VIP name.
vip name <text>	Sets the VIP name.
write	Stores the current configuration in permanent memory.
host 8 (config-host:8) level commands
clrscrn	Clears the screen.
default protocol	Restores the default value of the protocol (Telnet).
default remote port	Sets the remote port (used to connect to the host) to the
	default value,
	which depends on the selected protocol.
exit	Exits to the configuration level.
host <number>	Change to config host level
name <text>	Sets the name of the host.
	<text> = name of the host.
no name	Clears the name of the host.
no remote address	Clears the remote address of the host.
no ssh username	Clears the SSH username associated with the host.
protocol ssh	Sets the protocol to SSH.
protocol telnet	Sets the protocol to Telnet.
remote address <text>	Sets the IP address of the remote host to connect to when
	this host is
	selected on the login connect menu.
	<text> = IP address.
remote port <number>	Sets the remote port used to connect to the host.
	<number> = port to be used.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
ssh username <text>	Sets the username for logging into the host via SSH.
	<text> = username.
write	Stores the current configuration in permanent memory.
host 9 (tunnel-connect-host:1:9) level commands
address <text>	Sets the remote host to establish tunneling connections
	with.
	<text> = IP address or host name of the remote host.

XPort Pro Command Reference 95