Lantronix 900-558 manual Figured, Connect tunnel-connect1 level commands

	5: Commands and Levels
query port	Enters the query port level.
rss	Change to menu level for RSS configuration and status
show	Displays system information.
show history	Displays the last 20 commands entered during the current
	CLI session.
smtp	Changes to the command level for SMTP configuration
	and status.
snmp	Enters the snmp level.
syslog	Enters the syslog level.
tcp	Changes to the command level for TCP configuration and
	status.
terminal <line>	Enters the configure-terminal level.
	<line> = number of the terminal line (serial port) to be con-
	figured.
terminal network	Enters the configure-terminal level for the network.
tftp	Enters the tftp level.
udp	Changes to the command level for UDP configuration and
	status.
vip	Change to menu level for VIP configuration and status
write	Stores the current configuration in permanent memory.
connect (tunnel-connect:1) level commands
block network disable	Forwards (tunnels) network data in connect mode tunne-
	ling.
block network enable	Discards all data coming in from the connect mode tunnel
	before forwarding
	it to the serial interface (generally used for debugging).
block serial disable	Forwards (tunnels) serial data in connect mode tunneling.
block serial enable	Discards all data coming in from the serial interface before
	forwarding
	it to the connect mode tunnel (generally used for debug-
	ging).
clrscrn	Clears the screen.
connect mode always	Enables the tunneling server to always establish tunneling
	connections.
connect mode any character	Enables the tunneling server to establish a tunneling con-
	nection when a
	character is received on the corresponding line (serial
	port).
connect mode disable	Disables connect mode tunneling.
connect mode modem control asserted	Enables the tunneling server to make tunneling connec-
	tions when the modem
	control pin is asserted.
connect mode modem emulation	Enables modem emulation for connect mode tunneling.
connect mode start character	Enables connect mode tunneling when the configured start
	character
	is received on the line.
cp output	Enters the next lower level.
default connect mode	Restores the default connect mode as "disable".
default host mode	Connects to the first host in the list that accepts the con-
	nection.
default local port	Uses a random port number as the local port for establish-
	ing tunneling

XPort Pro Command Reference 53