Lantronix 900-558 manual Host 12 config-host12 level commands

	5: Commands and Levels
default protocol	Restores the default protocol as "TCP".
default tcp keep alive	Restores the default 45 second connect mode TCP keep
	alive timeout.
exit	Exits to the next higher level.
no address	Removes the remote host address used to establish
	tunneling connections.
no aes decrypt key	Removes the connect tunnel AES decrypt key.
no aes encrypt key	Removes the connect tunnel AES encrypt key.
no port	Removes the remote port used to establish tunnel connec-
	tions.
no ssh username	Removes the SSH user name.
no tcp keep alive	Disables the connect mode TCP keep alive timeout.
no vip name	Removes the VIP name.
port <number>	Sets the remote port to use for connect mode tunneling.
	<number> = number of the port to use.
protocol ssh	Uses SSH protocol for connect mode tunneling.
protocol ssl	Uses SSL protocol for connect mode tunneling.
protocol tcp	Uses TCP protocol for connect mode tunneling.
protocol tcp aes	Uses TCP protocol with AES encryption for connect mode
	tunneling.
protocol telnet	Uses Telnet protocol (with IAC) for connect mode tunne-
	ling.
protocol udp	Uses UDP protocol for connect mode tunneling.
protocol udp aes	Uses UDP protocol with AES encryption for connect mode
	tunneling.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show statistics	show connection statistics
ssh username <text>	Sets the SSH user name for use when establishing tunne-
	ling connections
	with other devices.
	<text> = SSH user name.
tcp keep alive <milliseconds>	Enables TCP keep alive for connect mode tunneling and
	sets the timer.
	<milliseconds> = timer value, in milliseconds.
validate certificate disable	Skips verification of the server certificate when connecting.
validate certificate enable	Requires verification of the server certificate when con-
	necting.
vip disable	Makes connections using the specified Address.
vip enable	Makes connections using the VIP name.
vip name <text>	Sets the VIP name.
write	Stores the current configuration in permanent memory.
host 12 (config-host:12) level commands
clrscrn	Clears the screen.
default protocol	Restores the default value of the protocol (Telnet).
default remote port	Sets the remote port (used to connect to the host) to the
	default value,
	which depends on the selected protocol.
exit	Exits to the configuration level.

XPort Pro Command Reference 73