Lantronix 900-558 manual Enable enable level commands

	5: Commands and Levels
priority normal	Sets X-Priority for email alerts to 3 (normal).
priority urgent	Sets X-Priority for email alerts to 1 (urgent).
priority very low	Sets X-Priority for email alerts to 5 (very low).
reply to <text>	Sets the Reply To address for email alerts.
	<text> = email address to place in the Reply To field of the
	email alert.
send	Sends an email using the current settings.
server port <number>	Sets the port used by the SMTP server.
	<number> = port used for SMTP on the server side.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show log	Displays the email log.
show statistics	Displays email statistics.
subject <text>	Sets the Subject for email alerts.
	<text> = text to placed as the subject.
to <text>	Sets To addresses for email alerts.
	<text> = a quoted, semicolon separated list of email ad-
	dresses.
write	Stores the current configuration in permanent memory.
enable (enable) level commands
auto show interfaces	Show interface statistics
auto show processes	Continuously show thread runtime information
clear interfaces counters	Zeros interface session counters
clrscrn	Clears the screen.
configure	Enters the configuration level.
connect	Show name and number for lines.
connect line <line>	Begin session on serial port.
cpm	Enters the CP Manager level.
device	Enters the device level.
disable	Exits the enable level.
dns	Enters the DNS level.
email <number>	Enters the configure email level.
exit	Exit from the system
filesystem	Enters the filesystem level.
kill ssh <session>	Kills SSH session with index from "show sessions"
kill telnet <session>	Kills Telnet session with index from "show sessions"
line <line>	Enters the line level.
	<line> = number of the line (serial port) to be configured.
lpd	Enters the lpd level.
no clear interfaces counters	Unzeros interface session counters
ping <host>	Ping destination continuously with 5 second timeout
ping <host> <count>	Ping destination n times with 5 second timeout
ping <host> <count> <timeout>	Ping destination n times with x timeout (in seconds)
ppp <line>	Enters the serial line PPP level.
reload	Reboot system
reload factory defaults	Reload factory defaults to permanent storage
show	Show system information

XPort Pro Command Reference 64