Lantronix 900-558 manual Mode tunneling

	5: Commands and Levels
default protocol	Restores the default protocol as "TCP".
default start character	Defaults the accept mode start character.
default tcp keep alive	Restores the default 45 second accept mode TCP keep
	alive timeout.
email connect <number>	Sets an email profile to use to send an email alert upon
	establishing
	an accept mode tunnel.
	<number> = the number of the email profile to use.
email disconnect <number>	Sets an email profile to use to send an email alert upon
	closing
	an accept mode tunnel.
	<number> = the number of the email profile to use.
exit	Returns to the tunnel level.
flush serial disable	Characters already in the serial data buffer are retained
	upon establishing
	an accept mode tunneling connection.
flush serial enable	Flushes the serial data buffer upon establishing an accept
	mode tunneling
	connection.
flush start character disable	Enables forwarding of the accept start character into the
	network.
flush start character enable	Disables forwarding of the accept start character into the
	network.
kill connection	Disconnects the active accept mode tunneling connection.
local port <number>	Sets the port to use for accept mode tunneling.
	<number> = number of the port to use.
no aes decrypt key	Removes the accept tunnel AES decrypt key.
no aes encrypt key	Removes the accept tunnel AES encrypt key.
no email connect	Discontinues sending email alerts upon establishing an
	accept mode tunnel.
no email disconnect	Discontinues sending email alerts upon closing an accept
	mode tunnel.
no local port	Uses the default port number as the local port for accept
	mode tunneling.
	The default port is 10000 + #, where # is the line number
	for this tunnel.
no tcp keep alive	Disables the accept mode TCP keep alive timeout.
password	Enters the next lower level.
protocol ssh	Uses SSH protocol for accept mode tunneling.
protocol ssl	Uses SSL protocol for accept mode tunneling.
protocol tcp	Uses TCP protocol for accept mode tunneling.
protocol tcp aes	Uses TCP protocol with AES encryption for accept mode
	tunneling.
protocol telnet	Uses Telnet protocol (with IAC) for accept mode tunneling.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show status	Displays tunnel accept status.
start character <control>	Sets the accept mode start character.
	The character may be input as text, control, decimal, or
	hex.
	A control character has the form <control>C.

XPort Pro Command Reference 50