Lantronix 900-558 manual Arp config-arp level commands, Cli config-cli level commands

	5: Commands and Levels
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
tcp keep alive <milliseconds>	Enables TCP keep alive for accept mode tunneling and
	sets the timer.
	<milliseconds> = timer value, in milliseconds.
write	Stores the current configuration in permanent memory.
arp (config-arp) level commands
add <ip address> <MAC address>	Adds an entry to the ARP table, mapping an IP address to
	a MAC address.
	<ip address> = IP address to be mapped.
	<mac address> = MAC address in colon-separated form.
clrscrn	Clears the screen.
default timeout	Restores the default ARP cache timeout.
exit	Exits to the configuration level.
remove all	Removes all entries from the ARP cache.
remove ip <ip address>	Removes an entry from the ARP cache.
	<ip address> = address of the entry being removed.
show	Displays the current configuration.
show cache	Displays the ARP cache table.
show history	Displays the last 20 commands entered during the current
	CLI session.
timeout <seconds>	Sets the ARP cache timeout.
	<seconds> = ARP cache timeout in seconds.
write	Stores the current configuration in permanent memory.
cli (config-cli) level commands
clrscrn	Clears the screen.
default inactivity timeout	The default inactivity timeout will apply to CLI sessions.
default quit connect line	Restores the default string used to quit the "connect line
	<line>" command.
enable level password <text>	Sets the enable-level password.
exit	Exits to the configuration level.
inactivity timeout <minutes>	Sets the inactivity timeout for all CLI sessions.
login password <text>	Sets the CLI login password.
no enable level password	Removes the enable-level password.
no inactivity timeout	No inactivity timeout will apply to CLI sessions.
no login password	Removes the CLI login password.
quit connect line <control>	Sets the string used to quit the "connect line <line>" com-
	mand.
	The characters may be input as text or control.
	A control character has the form <control>C.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
ssh	Change to menu level for SSH configuration and status.
telnet	Change to menu level for Telnet configuration and status.
write	Stores the current configuration in permanent memory.
client (ssh-client) level commands
clrscrn	Clears the screen.
default user <username> command	Restore the user command to the default login shell

XPort Pro Command Reference 51