Lantronix 900-558 manual Host 5 tunnel-connect-host15 level commands

	5: Commands and Levels
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
ssh username <text>	Sets the username for logging into the host via SSH.
	<text> = username.
write	Stores the current configuration in permanent memory.
host 5 (tunnel-connect-host:1:5) level commands
address <text>	Sets the remote host to establish tunneling connections
	with.
	<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>	Sets the connect tunnel AES decrypt key with up to 16
	bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punc-
	tuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains
	spaces.
aes decrypt key text <text>	Sets the connect tunnel AES decrypt key with up to 16
	bytes.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains
	spaces.
aes encrypt key <hexadecimal>	Sets the connect tunnel AES encrypt key with up to 16
	bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punc-
	tuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains
	spaces.
aes encrypt key text <text>	Sets the connect tunnel AES encrypt key with up to 16
	bytes.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains
	spaces.
auto show statistics	show connection statistics
clrscrn	Clears the screen.
default protocol	Restores the default protocol as "TCP".
default tcp keep alive	Restores the default 45 second connect mode TCP keep
	alive timeout.
exit	Exits to the next higher level.
no address	Removes the remote host address used to establish
	tunneling connections.
no aes decrypt key	Removes the connect tunnel AES decrypt key.
no aes encrypt key	Removes the connect tunnel AES encrypt key.
no port	Removes the remote port used to establish tunnel connec-
	tions.
no ssh username	Removes the SSH user name.
no tcp keep alive	Disables the connect mode TCP keep alive timeout.
no vip name	Removes the VIP name.
port <number>	Sets the remote port to use for connect mode tunneling.
	<number> = number of the port to use.
protocol ssh	Uses SSH protocol for connect mode tunneling.

XPort Pro Command Reference 88