Lantronix 900-558 Ftp config-ftp level commands, Host 1 tunnel-connect-host11 level commands

5: Commands and Levels

tftp get binary <source file> <destination file> <host>	Get a binary file using TFTP
tftp get binary <source file> <destination	Get a binary file using TFTP
file> <host> <port>
tftp put ascii <source file> <destination file> <host>	Put an ascii file using TFTP
tftp put ascii <source file> <destination file> <host> <port>	Put an ascii file using TFTP
tftp put binary <source file> <destination file> <host>	Put a binary file using TFTP
tftp put binary <source file> <destination	Put a binary file using TFTP
file> <host> <port>
touch <file>	Create a file
ftp (config-ftp) level commands
admin password <text>	Sets the administrative password for the FTP server.
	<text> = administrative password.
admin username <text>	Sets the administrative username for the FTP server.
	<text> = administrative username.
	It also removes the administrative password.
clear counters	Zeros FTP counters.
clrscrn	Clears the screen.
default admin username	Resets the FTP username to the default (admin).
exit	Returns to the config level.
no admin password	Removes the FTP administrative password.
no clear counters	Unzeros FTP counters.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show statistics	Displays the FTP statistics.
state disable	Disables the FTP server.
state enable	Enables the FTP server.
write	Stores the current configuration in permanent memory.
host 1 (tunnel-connect-host:1:1) level commands
address <text>	Sets the remote host to establish tunneling connections
	with.
	<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>	Sets the connect tunnel AES decrypt key with up to 16
	bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punc-
	tuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains
	spaces.
aes decrypt key text <text>	Sets the connect tunnel AES decrypt key with up to 16
	bytes.
	Each byte is represented by a single character.
	Note that quotes must enclose the value if it contains
	spaces.
aes encrypt key <hexadecimal>	Sets the connect tunnel AES encrypt key with up to 16
	bytes.
	Each byte is represented by two adjacent hex digits.
	Bytes may run together or be separated by optional punc-
	tuation:
	123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
	Note that quotes must enclose the value if it contains
	spaces.

XPort Pro Command Reference 66