Lantronix 900-558 manual Cp output tunnel-connect-cpoutput1 level commands

	5: Commands and Levels
exit	Exits to the next higher level.
group <text>	Specify a CP group that shall trigger an email.
	<text> = configurable pin group.
no group	Disables the trigger to send an email.
no trigger value	Clears the value that shall trigger an email.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
trigger value <number>	Specify a value of the CP group that shall trigger an
	email.
	<number> = numeric value to watch for from the CP
	group. Can be specified as
	hex if prepended with “0x”.
write	Stores the current configuration in permanent memory.
cp output (tunnel-connect-cp_output:1) level commands
clrscrn	Clears the screen.
connection value <number>	Sets the value to output to the CP Group upon connect
	mode connection.
	<number> = binary to output (typically 1 or 0).
default connection value	Restores the default value for connect mode connection.
default disconnection value	Restores the default value for connect mode disconnec-
	tion.
disconnection value <number>	Sets the value to output to the CP Group upon connect
	mode disconnection.
	<number> = binary to output (typically 1 or 0).
exit	Exits to the next higher level.
group <text>	Configures the CP Group to set upon making or breaking
	a connect
	mode connection.
	<text> = CP Group.
no group	Removes the CP Set Group for connect mode.
show	Shows the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
cp output (tunnel-accept-cp_output:1) level commands
clrscrn	Clears the screen.
connection value <number>	Sets the value to output to the CP Group upon accept
	mode connection.
	<number> = binary to output (typically 1 or 0).
default connection value	Restores the default value for accept mode connection.
default disconnection value	Restores the default value for accept mode disconnection.
disconnection value <number>	Sets the value to output to the CP Group upon accept
	mode disconnection.
	<number> = binary to output (typically 1 or 0).
exit	Exits to the next higher level.
group <text>	Configures the CP Group to set upon making or breaking
	an accept
	mode connection.
	<text> = CP Group.
no group	Removes the CP Set Group for accept mode.
show	Shows the current configuration.

XPort Pro Command Reference 56