Freescale Semiconductor MMDS0508 manual Examples

Freescale Semiconductor, Inc.

Appendix

MMDS Commands

A bit set in both the clips and masks sets the trigger to high (-H). A bit clear in clips, but set in masks, sets the trigger to low (-L). A bit clear in a mask means that the trigger does not depend on the state of the clip.

Examples:

STA 0x1000

Sets analyzer trigger A to match accesses at address $1000.

STB , 4

Sets analyzer trigger B to match accesses with a value of 4, at any address.

STC 8 20..40

Sets analyzer triggers C and D to match accesses having a value from 20 to 40, at address 8.

STC 8..10 20

Sets analyzer triggers C and D to match accesses having the value 20, at any address from 8 to 10.

NOTE	Mask bits that have the value 0 are “Don’t Care” bits: for those
	positions of an address, data, or clip value, either a 0 or a 1 trips the
	trigger. Mask bits set to 1 identify positions whose values must match
	those of the specified address, data, or clip value. For Address
	0xC000, Mask 0xFFFC, loading any of four values in the address bus
	would trip the trigger: 0xC000, 0xC001, 0xC002, or 0xC003. For
	Address 0x00B0, Mask 0xFFF0, any address in the range
	0x00B0..0x00BF would trip the trigger.

TD

A.1.2.7 Short Description

trigger disable.

A.1.2.8 Syntax

TD list *

A–64 MMDS0508 Target Interface

For More Information: www.freescale.com