Dell 2145cn Loading paper in the multi-purpose tray, Tips on using the multi-purpose tray, Full

1.Pull out the tray and adjust the tray size to the media size you are loading.

2.Place paper with the side you want to print facing up.

1	Full
2	Empty

3.When you print a document, set the paper source and type in the software application. See Software section for printing from your computer.

• If you experience problems with paper feed, place one sheet at a time in the multi-purpose tray.

•You can load previously printed paper. The printed side should be facing down with an uncurled edge at the front. If you experience problems with paper feed, turn the paper around. Note that print quality is not guaranteed.

Loading paper in the multi-purpose tray

The multi-purpose tray can hold special sizes and types of print material, such as postcards, note cards, and envelopes. It is useful for single page printing on letterhead or colored paper.

Tips on using the multi-purpose tray

•Load only one size of print media at a time in the multi-purpose tray.

•To prevent paper jams, do not add paper when there is still paper in the multi-purpose tray. This also applies to other types of print media.

•Print media should be loaded face down with the top edge going into the multi-purpose tray first and be placed in the center of the tray.

•Always load only the specified print media to avoid paper jams and print quality problems (see "Selecting print media" on page 24).

•Flatten any curl on postcards, envelopes, and labels before loading them into the multi-purpose tray.

1.Hold the handle of multi-purpose tray and pull it down to open.

2.Load the paper.

• If you want to load the used paper, place the paper with the printed side facing down.

•If you are using paper, flex or fan the edge of the paper stack to separate the pages before loading.

28 Loading originals and print media