6.Press OK when Yes appears to scan more pages. Load an original and
press Color Start (
) or Black Start (
).
Regardless of the button you press, the color mode is decided as customized. See “Customizing scan to USB” on page 53. Otherwise, press the left/right arrow to select No and press OK.
After scanning is complete, you can remove the USB memory device from the printer.
Customizing scan to USB
You can specify image size, file format, or color mode for each scanning to USB job.
1.Press Scan/Email.
2.Press Menu ( 
) until Scan Feature appears on the bottom line of the display and press OK.
3.Press OK when USB Memory appears.
4.Press the left/right arrow until the setting option you want appears and press OK.
You can set the following options:
•Scan Size: Sets the image size.
•Original Type: Sets the original document’s type.
•Resolution: Sets the image resolution.
•Scan Color: Sets the color mode. If you select Mono in this option, you cannot select JPEG in Scan Format.
•Scan Format: Sets the file format in which the image is to be saved. When you select TIFF or PDF, you can select to scan multiple pages. If you select JPEG in this option, you cannot select Mono in Scan Color.
5.Press the left/right arrow until the desired status appears and press OK.
6.Repeat steps 4 and 5 to set other setting options.
7.When you have finished, press Stop/Clear (
) to return to Ready mode.
You can change the default scan settings. For details. See "Changing the default scan settings" on page 39.
PRINTING FROM A USB MEMORY DEVICE
You can directly print files stored on a USB memory device. You can print TIFF, BMP, JPEG, PDF, and PRN files.
Direct Print option supported file types:
•PRN: Dell PCL 6 compatible.
•PRN files can be created by selecting the Print to file check box when you print a document. The document will be saved as a PRN file, rather than printed on paper. Only PRN files created in this fashion can be printed directly from USB memory. See the Software Section to learn how to create a PRN file.
•BMP: BMP Uncompressed
•TIFF: TIFF 6.0 Baseline
•JPEG: JPEG Baseline
•PDF: PDF 1.4 and below
To print a document from a USB memory device:
1.Insert a USB memory device into the USB connector on your printer. If one has already been inserted, press USB Print (
).
Your printer automatically detects the device and reads data stored on it.
2.Press the left/right arrow until the folder or file you want appears and press OK.
If you see D in the front of a folder name, there are one or more files or folders in the selected folder.
3.If you selected a file, skip to the next step.
If you selected a folder, press the left/right arrow until the file you want appears.
4.Press the left/right arrow to select the number of copies to be printed or enter the number.
5.Press OK, Color Start (
) or Black Start (
) to start printing the selected file.
There are two types of mode as following:
•OK or Color Start (
) : Color print
•Black Start (
) : Black and White print
After printing the file, the display asks if you want to print another job.
6.Press OK when Yes appears to print another job, and repeat from step 2. Otherwise, press the left/right arrow to select No and press OK.
7.Press Stop/Clear (
) to return to Ready mode.
Can choose paper size and tray when printing. See "Setting the paper size and type" on page 30.
BACKING UP DATA
Data in the printer’s memory can be accidentally erased due to power failure or storage failure. Backup helps you protect your Address Book entries and the system settings by storing them as backup files on a USB memory device.
Backing up data
1.Insert the USB memory device into the USB connector on your printer.
2.Press Menu ( 
) until System Setup appears on the bottom line of the display and press OK.
3.Press OK when Machine Setup appears.
4.Press the left/right arrow until Export Setting appears and press OK.
5.Press the left/right arrow until the option you want appears.
•Address Book: Backs up all Address Book entries.
•Setup Data: Backs up all system settings.
6.Press OK to begin backing up the data. The data is backed up to the USB memory.
7.Press Stop/Clear (
) to return to Ready mode.
Restoring data
1.Insert the USB memory device on which the backup data is stored in to the USB connector.
2.Press Menu ( 
) until System Setup appears on the bottom line of the display and press OK.
3.Press OK when Machine Setup appears.
4.Press the left/right arrow until Import Setting appears and press OK.
5.Press the left/right arrow until the data type you want appears and press OK.
6.Press the left/right arrow until the file containing the data you want to restore appears and press OK.
7.Press OK when Yes appears to restore the backup file to the printer.
8.Press Stop/Clear (
) to return to Ready mode.