Citizen Systems Model CMP-10 manual ESC $ n1 n2, Default

ESC $ n1 n2

[Function]	Specifying the Absolute Positions
[Code]	<1B>H<24>H<n1><n2>
[Range]	{0 =< n1 =< FF(Hex)}
	{0 =< n2 =< 1(Hex)}
[Outline]	The printing start position is specified in the number of dots (1/203 inch unit) from
	the beginning of line.
	¥ The number of dots is divided by 256, whose quotient is taken as n2 and the residual
	as n1.
	¥ Therefore, the printing start position is equal to n1 + n2 ⋅ 256 from the beginning of
	line.
[Caution]	Specifying beyond the line end is ignored.
[Default]	The initial value is not specified.
[See Also]	ESC \
[Sample Program]
	PRINT #1, CHR$ (&H1B) + “$”;
	PRINT #1, CHR$ (0) + CHR$ (0) + “A”;
	PRINT #1, CHR$ (&H1B) + “$”;
	PRINT #1, CHR$ (50) + CHR$ (0) + “B”;
	PRINT #1, CHR$ (&H1B) + “$”;
	PRINT #1, CHR$ (0) + CHR$ (1) + “C”;
	PRINT #1, CHR$ (&HA);
	PRINT #1, CHR$ (&H1B) + “$”;
	PRINT #1, CHR$ (100) + CHR$ (0) + “A”;
	PRINT #1, CHR$ (&H1B) + “\”;
	PRINT #1, CHR$ (&HC2) + CHR$ (&HFF) + “B”;
	PRINT #1, CHR$ (&HA);
[Print Results]

0	50		100
>	>
A		B	>
		B	A
		>	>

256

>

C

Ñ 11 Ñ