Citizen Systems Model CMP-10 manual ESC & m n1 n2 d k, Initialize command

ESC & m n1 n2 [d] k

[Function]	Define user characters
[Code]	<1B>H<26>H<m><n1><n2>[<d>]k
[Range]	{m = 0, 1, 2, 3(Hex)}
	{20 =< n1 =< FF(Hex)}
	{n1 =< n2 =< FF(Hex)}
	{k=(n2-n1+1)*48} (m=2)
	{k=(n2-n1+1)*16} (m=3)
[Outline]	Defines a group of user characters.
	m=0: Copy internal character set A to user character set A
	(Parameters n1, n2 and d are omitted)
	m=1: Copy internal character set B to user character set B
	(Parameters n1, n2 and d are omitted)
	m=2: For Font A (12 ⋅ 24), n1 denotes Start character code and n2 End character
	code. Every character is 48 bytes, two bytes for each line. Only the first nibble
	of the second byte is used.
	m=3: Define character group with ASCII codes between >= n1 and =< n2 for character
	set B (9 ⋅ 16). Every character is 16 bytes.
[Caution]	The data for character set A is composed from left to right and from top to bottom
	with two bytes for each horizontal line. The first byte contains the first 8 bits with
	the left most bit is MSB. From the second byte only the first nibble (the most significant
	4 bits) is valid.
	The data for character set B is composed from left to right and from top to bottom
	with only one byte for each horizontal line. The nineth bith is alawys 0.
	Downloaded characters are valid even after switching off the printer or after issuing
	Initialize command.

24

Download character
Font A (12 ⋅ 24)		Font B (9 ⋅ 16)
(Last 4 bits are not used and fixed as zero.)		(9th dot is fixed as space.)
d1	d2	d1
d3	d4	d2
d5	d6	d3
d7	d8	d4
d9	d10	d5
		16

d14

d15

d16

8 7 6 5 4 3 2 1

d43			d44
d45			d46
d47			d48
						0	0
MSB				0	0			LSB
8	7	6	5	4	3	2	1

Ñ 13 Ñ