Olivetti 20W, 16W Paper, Special papers, For best results, use only Olivetti recommended paper

Page 17

LOADING PAPER

The paper required indicator ( ) will light up when there is no copy paper in the selected paper feed tray, or when the selected paper tray is not installed or is improperly installed.

PAPER

For best results, use only OLIVETTI recommended paper.

	Paper tray type	Paper type	Size	Weight	Capacity
	Paper tray	Standard paper	A5*1	56 g/m2 to 90 g/m2 *2	250 sheets
	Paper tray	Standard paper	A5*1	56 g/m2 to 90 g/m2 *2	250 sheets		1
		Recycled paper	B5	(15 lbs. to 24 lbs. *2)	(Load paper lower
			A4		than the line on the
			B4		tray)
			A3
			A3
			(5-1/2" x 8-1/2"*1(Invoice))
			(8-1/2" x 11" (Letter))
			(8-1/2" x 13" (Foolscap))
			(8-1/2" x 14" (Legal))
			(11" x 17" (Ledger))

	Bypass tray	Standard paper	A6R to A3	56 g/m2 to 80 g/m2	100 sheets *3
		Recycled paper	(5-1/2" x 8-1/2" (Invoice)	(15 lbs. to 20 lbs.)
			to 11" x 17" (Ledger))
		Thick paper	to 11" x 17" (Ledger))	Max. 200 g/m2 (54	Load one sheet of
		Thick paper		Max. 200 g/m2 (54	Load one sheet of
				lbs.)	these papers at a
					time to the bypass
		Transparency film			time to the bypass
		Transparency film			tray.
		Labels			tray.
		Labels

		Envelopes	International DL		5 sheets
			(110 mm x 220 mm)
			International C5
			(162 mm x 229 mm)
			Commercial 9
			(3-7/8" x 8-7/8")
			Commercial 10
			(4-1/8" x 9-1/2")

*1 A5 (5-1/2" x 8-1/2") can be used in the upper paper tray but cannot be used in other trays.

*2 When making a large number of copies or prints using 90 g/m2 (24 lbs.) paper, remove the output from the paper output tray when about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed to accumulate.

*3 The number of sheets of the paper which can be set changes with the weight of a paper.

Special papers

Follow these guidelines when using special papers.

OUse OLIVETTI recommended transparency film and label sheets. Using other than OLIVETTI recommended paper may result in misfeeds or smudges on the output. If other than OLIVETTI recommended media must be used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or printing).

OThere are many varieties of special paper available on the market, and some cannot be used with this machine. Before using special paper, contact your authorised service representative.

OBefore using other than OLIVETTI recommended paper, make a test copy to see if the paper is suitable.

13

Image 17

Contents Copia 16W Copia 20W Copia 16W d-Copia 20WPublication Issued by Page For Countries in the European Union EU Contents Troubleshooting Do not install your machine in areas that are Important Points When Selecting AN Installation SiteTrademark acknowledgements Environmental InformationSoftware Setup Guide separate manual Online Manual on the accessory CD-ROMMeaning of R in Original and Paper Size Indications Conventions Used in this ManualAB series metric and inch series references Differences Between ModelsHigh-speed laser copying Enhanced copying featuresHigh-quality digital image Scan once/Print manyContains operation keys and indicator lights. p.10 Press to turn the machine power on and off. p.12Adjust to the width of the paper. p.15 Use to clean the transfer charger. p.57Open to remove misfed originals. p.47 Adjust to the size of the originalsOriginals exit the machine here after copying Contains toner. p.54Operation Panel Use to set the paper size in the paper trays. p.16 Light up to show the selected copy paper size. p.16Use to manually select a paper tray. p.21 Press for automatic copy ratio selection. p.22Power OFF Power onPower Save Modes Initial settingsPaper Follow these guidelines when using special papersSpecial papers For best results, use only Olivetti recommended paperLoading the paper tray Loading PaperPush the centre Pressure plate down until It locks into placeLoading the bypass tray Important points when inserting paper in the bypass trayEnvelopes Changing a TRAY’S Paper Size SettingPress the Start key and then the Paper Size Enter key Open the document cover/SPF, and place the original Normal CopyingCopying from the document glass Set the originals face up in the document feeder tray Copying from the SPFAuto paper select mode Two-tray model only Making a Copy Darker or Lighter Auto tray switching Two-tray model onlySelecting the Tray Original typesREDUCTION/ENLARGEMENT/ZOOM Setting the Number of CopiesAutomatic Ratio Selection Original position Selectable ratiosFine adjustment of the ratio Selecting a preset ratioManual Ratio Selection Press the Auto Image key Auto %Press the Copy ratio display key XY Zoom copyingPress the Copy ratio display key Place original B as shown below TWO-SIDED Copying Using the Bypass TrayCopy original a Dual page Copying Copy indicator Is litSet the original size to A3 11 x Press the Dual page Copy keyReplace the previous originals and press the Start key Interrupting a Copy RUNPress the Interrupt key to interrupt the copy run Basic Procedure for Printing Using the Printer ModeMaketray. sure that paper is loaded Click the Print button or the OK button to begin printingWhen Use close paper size is disabled Pausing a print jobWhen Use close paper size is enabled Operation in Copy and Printer ModesTo complete Adjusting the Automatic Exposure LevelSetting When enabling toner Toner Save Mode and High Image Quality ModePhoto indicator stops blinking and lights steadily Save mode, make sureUser Programs Customising SettingsMinimum 300 dpiShort beep CopiesBase settings Selecting a Setting for a User ProgramAuditing Mode Settings Settings for Auditing ModeAuditing Mode For the setting codes, see Auditing Mode SETTINGS. p.36 Selecting Auditing Mode SettingsAccount number entry Auditing modeAccount number change Account number deletionCopying when Auditing mode is enabled Resetting accountTroubleshooting MACHINE/COPYING Problems Paper is not loaded properly Problem Cause and solution Misfeed occursPieces of paper inside machine Paper misfeed Too much paper is loaded in the trayOriginal smudged or blotchy Any other indicators are litCopies Transfer charger is dirty Copying or printing is performedPrinting Problems Click Add or Remove Programs Removing the softwareClick the start button, and then click Control Panel Indicators and Display Messages Misfeed in the SPF Misfeed RemovalRemove the misfed original Copia 20W Copia 16WMisfeed in the Bypass Tray Misfeed indicator will go outMisfeed in the paper feed area Misfeed in the MachineLower the fusing unit release levers to Misfeed in the fusing areaAllow easier removal Misfed paper duringClose the side cover Misfeed in the transport areaBe careful not to tear the misfed paper during removal Be careful not to tear Misfed paper during RemovalPush the upper paper tray in completely Misfeed in the Upper Paper TrayClose the upper paper tray Remove the misfed paper Open the lower side coverClose the lower side cover Close the lower paper trayReplacing the Toner Cartridge Toner cartridge replacement required indicator will go outClose the front cover Green part of the cartridgeChecking the Total Output Count Checking the Total Output Count and Toner LevelTotal output count Total copy countCleaning the Document Glass and SPF/ Document Cover Routine MaintenanceChecking the Toner Level Press the Light key to return to the normal displayCleaning the Transfer Charger Cleaning the Bypass Tray Paper Feed RollerSingle Pass Feeder SpecificationsPeripheral Devices Proper Storage Storage of SuppliesStore the supplies in a location that is Store paper in the wrapper and lying flatSpecifications Printer Function Software License Page Index SymbolsTroubleshooting Preset Ratio selector indicatorOriginal types 10, 13Indicators, lit and blinking Machine settingsProblem occurs Page Class Laser Product Laser Klasse Page Code