Olivetti 490, 450 manual Publishedby

Page 2

PUBLISHEDBY:	Editors:
Olivetti I- Jet S.p.A.	Olivetti Tecnost, S.p.A.
Località Le Vieux	Via Jervis, 77 - 10015 IVREA (Italy)
11020 ARNAD (Italy)

Copyright © 2004, Olivetti

All rights reserved

The manufacturer reserves the right to make any changes to the machine described in this manual, at any time, and without prior warning.

This machine has been approved, under the terms of Council Decision 98/482/EC, for Europe-wide connection as a single terminal to an analogue Public Switched Telephone System (PSTN) system. However, due to differences between individual PSTNs in the various countries, the approval does not unconditionally guarantee success operation of every PSTN termination point.

If you encounter any problems, you should contact your supplier immediately.

The manufacturers declare under their own responsibility that this product complies with provisions laid down by the directive 1999/05/CE. Conformance is certified by the application of the mark to the product.

Network compatibility declaration

This product has been designed and developed to operate in the networks of all European Community countries, and in those of Switzerland and Norway.

Full compatibility with the networks of individual countries will depend on specific national software parameters which can be set in the product. If you encounter problems with non EC PSTN networks, contact your national technical support service.

Your attention is drawn to the following conditions that could compromise the conformity attested above as well as the machine’s characteristics:

•incorrect electrical supply;

•incorrect installation, erroneous or improper use, or any use that differs from what is indicated in the User Manual supplied with the machine;

•replacement of components or original parts using other types, not approved by the manufacturer, or where carried out by unauthorized persons.

The electrical socket must be near to hand and easily accessible. To disconnect the machine from the electrical power supply, unplug it from the supply socket.

Image 2

Contents Ink Jet Fax Publishedby Add some printing paper Insert the print head InstallationQuick Guide Reception When the telephone rings, liftTransmission CopyingTable of Contents Page Introduction Operations Essential for Correct Operation To Connect IT to the Telephone LineCase 2 Connection Cord FAX Other Devices Case 3 Connection Austria Cord FAXTo SET the Language and the Country Destination To Connect IT to the Power SupplyTo Connect the Telephone Handset To SET the Date and Time To ADD PaperAutomatic Check Print Head To Install the Print HeadFORMATA4 INK LOWALL That is Missing NOW is Your Name FAX Number Print Head PrecautionsTo Change the Date and Time To SET IT UP for the Telephone Line Components Figure shows the external and internal parts of fax machineConsole Display To Send a Document DimensionsBasic Transmission and Reception Operations Document ReadyPress the key OFF HookTo start sending the document If you want to abort the transmission in progress, pressType FAX Number NUM/TOUCH/SPEED Delayed TXType Time Hhmm Automatic TX ATAutomatic Memory TX Print SETTING?TX from Memory To Receive a DocumentTo SET ONE-TOUCH and Speed Dialling Type Speed no Edit Another YESCoded Speed Dial O1TEL noTo Print Reports and Lists Address Book Code orIncoming Calls Fax machine prints the following reportsBROADC. REP.ON Delay List onFailed TX Report Print OUT Report Print InstallPrint Settings Last TX ReportTo Telephone with Speed Dialling To Make a CallTo Telephone with ONE-TOUCH Dialling To Telephone by Running a Search Phone BookNumbers To Make a Copy To Make a CopyWhat Documents can be Copied Copy High QualOther Useful Reception Settings More Sophisticated OperationsCaller ID on Ring VolumehighTEL. Line SETU-UP Ring COUNT02Change Pattern FAX/TEL TIMER20DISTINC.RINGOFF AUTODETECT. RingType Code Other Useful Transmission SettingsRemote Starton CODE0/9,* *8TX Speed Line MonitoroffBuzzer VOL.LOW ECM onPolling TX SENDING/RECEIVING a Document Polling ModePolling RX For example 1820 and then press the . The dis- play showsWhat Happens if the Paper or INK has RUN OUT Troubleshooting GuideFor Minor Problems If the Transmission is UnsuccessfulError Codes Code Message Cause of Error What to doSignals and Messages RX in Memory System Error NNTX Error DiallingTo Replace the Print Head Maintenance OperationsCleaning the Print Head and Testing Nozzles To Clean the Optical Reader To Clean the Electrical Contacts Print HeadTo Clean the Nozzles of the Print Head Only for monochrome print heads blackTo Remove Jammed Sheets of Paper To Clean the CasingTo Remove Jammed Documents If the paper gets jammed in the ASFInstalling the Software in Windows 2000 Windows XP Software Installation RequirementsTo Install the Linkfax PRO Software Minimum Requirements of the PCAccessing the ON-LINE Documentation To Uninstall the Linkfax PRO SoftwareTroubleshooting Guide All four Windows environments 98 Second Edition/ME/ 2000/XPAutomatic feeding Technical DataManual feeding Page Monochrome print head part number 255933Y