Olivetti 450, 490 RX in Memory, System Error NN, TX Error, Dialling, Lift Handset, Poll RX Hhmm

Page 39

RX IN MEMORY

Reception continues in the memory because an error occurred dur- ing the reception of a document, preventing it from being printed: check the type of fault on the lower line of the display and correct it.

SYSTEM ERROR NN

A fatal error has occurred on the fax machine: turn the fax machine off and then on again. If the error persists, turn off the fax machine and call the Customer Engineering Service.

TX ERROR

The document was not sent correctly: press the key to turn off

the " " error LED indicator and clear the message from the dis- play, and then send it again.

OTHER ACOUSTIC SIGNALS

Short 1-second signal

Transaction carried out successfully.

Intermittent 20-second signal

Prompt to lift the handset to answer a telephone call.

OTHER MESSAGES ON THE DISPLAY

CHECK PRINT OUT 1=EXIT 0=REPEAT

The fax machine has automatically tested the print head nozzles and printed out the test sheet: check whether the printing quality is accept- able and make your choice.

CONNECTING

The fax machine is connecting to your correspondent's fax machine.

DIALLING

The fax machine is dialling the number of the correspondent you called.

DOCUMENT READY

You have inserted the document in the ADF correctly.

LIFT HANDSET

The correspondent has made a talk request: lift the handset to start the conversation.

LINE ON HOLD, PRESS HOLD

You have put a telephone call on hold by pressing the key: press the key again to resume the conversation with the correspondent.

MEMORY TX

You have set transmission from the memory.

NEW PRINT HEAD?, 1=YES 0=NO

You have installed a disposable print head for the first time or you have removed and reinstalled it: select the relevant answer. If you answer yes but the print head is not new, the fax machine will not detect the out of ink condition.

OFF HOOK

You have engaged the line by lifting the handset of the telephone connected.

POLL RX: HH:MM

You have made a transmission request (Polling reception).

PRINTING

The fax machine is printing a report or a list.

REPLACE HANDSET

You have activated the "handsfree" function. Hang up.

RX COMPLETED

The document was received correctly.

RX INTERRUPTED

You aborted reception by pressing the key.

STORING

The fax machine is saving the pages of the document to be copied or to be sent from memory.

TRANSMITTING

A document is being sent.

TRANSMITTING....

A document is being sent.

TX AT: HH:MM

You have set transmission at a preset time (broadcast transmission).

TX COMPLETED

Transmission was completed successfully.

TX INTERRUPTED

You aborted transmission by pressing the key.

33

Image 39
Contents Ink Jet Fax Publishedby Installation Quick GuideAdd some printing paper Insert the print head Copying When the telephone rings, liftTransmission ReceptionTable of Contents Page Introduction To Connect IT to the Telephone Line Operations Essential for Correct OperationOther Devices Case 3 Connection Austria Cord FAX Case 2 Connection Cord FAXTo Connect IT to the Power Supply To Connect the Telephone HandsetTo SET the Language and the Country Destination To ADD Paper To SET the Date and TimeINK LOW To Install the Print HeadFORMATA4 Automatic Check Print HeadPrint Head Precautions To Change the Date and TimeALL That is Missing NOW is Your Name FAX Number To SET IT UP for the Telephone Line Figure shows the external and internal parts of fax machine ComponentsConsole Display Document Ready DimensionsBasic Transmission and Reception Operations To Send a DocumentIf you want to abort the transmission in progress, press OFF HookTo start sending the document Press the keyAutomatic TX AT Delayed TXType Time Hhmm Type FAX Number NUM/TOUCH/SPEEDTo Receive a Document Print SETTING?TX from Memory Automatic Memory TXTo SET ONE-TOUCH and Speed Dialling O1TEL no Edit Another YESCoded Speed Dial Type Speed noFax machine prints the following reports Address Book Code orIncoming Calls To Print Reports and ListsDelay List on Failed TX ReportBROADC. REP.ON Last TX Report Print InstallPrint Settings Print OUT ReportTo Telephone by Running a Search Phone Book To Make a CallTo Telephone with ONE-TOUCH Dialling To Telephone with Speed DiallingNumbers Copy High Qual To Make a CopyWhat Documents can be Copied To Make a CopyMore Sophisticated Operations Other Useful Reception SettingsRing COUNT02 Ring VolumehighTEL. Line SETU-UP Caller ID onAUTODETECT. Ring FAX/TEL TIMER20DISTINC.RINGOFF Change PatternCODE0/9,* *8 Other Useful Transmission SettingsRemote Starton Type CodeECM on Line MonitoroffBuzzer VOL.LOW TX SpeedFor example 1820 and then press the . The dis- play shows SENDING/RECEIVING a Document Polling ModePolling RX Polling TXIf the Transmission is Unsuccessful Troubleshooting GuideFor Minor Problems What Happens if the Paper or INK has RUN OUTCode Message Cause of Error What to do Error CodesSignals and Messages Dialling System Error NNTX Error RX in MemoryMaintenance Operations Cleaning the Print Head and Testing NozzlesTo Replace the Print Head Only for monochrome print heads black To Clean the Electrical Contacts Print HeadTo Clean the Nozzles of the Print Head To Clean the Optical ReaderIf the paper gets jammed in the ASF To Clean the CasingTo Remove Jammed Documents To Remove Jammed Sheets of PaperMinimum Requirements of the PC Software Installation RequirementsTo Install the Linkfax PRO Software Installing the Software in Windows 2000 Windows XPAll four Windows environments 98 Second Edition/ME/ 2000/XP To Uninstall the Linkfax PRO SoftwareTroubleshooting Guide Accessing the ON-LINE DocumentationTechnical Data Manual feedingAutomatic feeding Page Monochrome print head part number 255933Y