Olivetti 490, 450 manual Line Monitoroff, Buzzer VOL.LOW, TX Speed, ECM on

Page 34

TO HEAR THE LINE SIGNALS

The fax machine is set up so that you can hear thedialling tones during the dialling phases as well as the connec- tion signals exchanged between your fax machine and your correspondent's fax machine. If this is not true, pro- gram the function as follows:

Until the display shows:

INSTALLATION

Until the display shows:

LINE MONITOR:OFF

/} To view the other available option: "LINE MONITOR:ON".

To confirm your choice.

To return the fax machine to the initial stand-by mode.

TO REGULATE THE SPEAKER VOLUME

If the volume of the dialling tones and connection signals is

too low or too high, regulate it using the key.

The display shows:

OFF HOOK

00:00

To raise or lower the volume of the speaker. The display

shows the volume level set in the top right-hand corner.

TO REGULATE THE BUZZER VOLUME

Until the display shows:

FAX SET-UP

The display shows:

DATE AND TIME

The display shows:

VARIOUS SETTINGS

Until the display shows:

BUZZER VOL.:LOW

/} To view the other available options: "BUZZER VOL.:HIGH", "BUZZER VOL.:MED" and "BUZZER VOL.:OFF". For exemple: "BUZZER VOL.:MED".

To confirm your choice.

To return the fax machine to the initial stand-by mode.

TO REDUCE THE TRANSMISSION SPEED

The fax machine transmits regularly at a speed of 14400 bps (bits per second). A transmission speed of 9600 or 4800 bps is recommended on disturbed telephone lines.

Until the display shows:

FAX SET-UP

The display shows:

DATE AND TIME

The display shows:

VARIOUS SETTINGS

Until the display shows:

TX SPEED 14.4

/} To view the other available values: "TX SPEED 9.6" or

"TX SPEED 4.8". For exemple: "TX SPEED 9.6".

To confirm your choice.

To return the fax machine to the initial stand-by mode.

TO ENABLE/DISABLE ECM

The ECM (Error Correction Mode) is a system for cor- recting the errors caused by interference on the line. This function only has effect if it has been enabled both on your fax machine and on your correspondent's fax machine and is indicated by a letter "E" appearing on the display.

The fax machine is set up to send documents in this mode. However, you can set it up to send documents in normal mode, as follows:

Until the display shows:

FAX SET-UP

The display shows:

DATE AND TIME

The display shows:

VARIOUS SETTINGS

The display shows:

ECM: ON

/} To view the other available option: "ECM: OFF".

To confirm your choice.

To return the fax machine to the initial stand-by mode.

28

Image 34

Contents Ink Jet Fax Publishedby Quick Guide InstallationAdd some printing paper Insert the print head Reception When the telephone rings, liftTransmission CopyingTable of Contents Page Introduction Operations Essential for Correct Operation To Connect IT to the Telephone LineCase 2 Connection Cord FAX Other Devices Case 3 Connection Austria Cord FAXTo Connect the Telephone Handset To Connect IT to the Power SupplyTo SET the Language and the Country Destination To SET the Date and Time To ADD PaperAutomatic Check Print Head To Install the Print HeadFORMATA4 INK LOWTo Change the Date and Time Print Head PrecautionsALL That is Missing NOW is Your Name FAX Number To SET IT UP for the Telephone Line Components Figure shows the external and internal parts of fax machineConsole Display To Send a Document DimensionsBasic Transmission and Reception Operations Document ReadyPress the key OFF HookTo start sending the document If you want to abort the transmission in progress, pressType FAX Number NUM/TOUCH/SPEED Delayed TXType Time Hhmm Automatic TX ATAutomatic Memory TX Print SETTING?TX from Memory To Receive a DocumentTo SET ONE-TOUCH and Speed Dialling Type Speed no Edit Another YESCoded Speed Dial O1TEL noTo Print Reports and Lists Address Book Code orIncoming Calls Fax machine prints the following reportsFailed TX Report Delay List onBROADC. REP.ON Print OUT Report Print InstallPrint Settings Last TX ReportTo Telephone with Speed Dialling To Make a CallTo Telephone with ONE-TOUCH Dialling To Telephone by Running a Search Phone BookNumbers To Make a Copy To Make a CopyWhat Documents can be Copied Copy High QualOther Useful Reception Settings More Sophisticated OperationsCaller ID on Ring VolumehighTEL. Line SETU-UP Ring COUNT02Change Pattern FAX/TEL TIMER20DISTINC.RINGOFF AUTODETECT. RingType Code Other Useful Transmission SettingsRemote Starton CODE0/9,* *8TX Speed Line MonitoroffBuzzer VOL.LOW ECM onPolling TX SENDING/RECEIVING a Document Polling ModePolling RX For example 1820 and then press the . The dis- play showsWhat Happens if the Paper or INK has RUN OUT Troubleshooting GuideFor Minor Problems If the Transmission is UnsuccessfulError Codes Code Message Cause of Error What to doSignals and Messages RX in Memory System Error NNTX Error DiallingCleaning the Print Head and Testing Nozzles Maintenance OperationsTo Replace the Print Head To Clean the Optical Reader To Clean the Electrical Contacts Print HeadTo Clean the Nozzles of the Print Head Only for monochrome print heads blackTo Remove Jammed Sheets of Paper To Clean the CasingTo Remove Jammed Documents If the paper gets jammed in the ASFInstalling the Software in Windows 2000 Windows XP Software Installation RequirementsTo Install the Linkfax PRO Software Minimum Requirements of the PCAccessing the ON-LINE Documentation To Uninstall the Linkfax PRO SoftwareTroubleshooting Guide All four Windows environments 98 Second Edition/ME/ 2000/XPManual feeding Technical DataAutomatic feeding Page Monochrome print head part number 255933Y