Olivetti 450, 490 Remote Starton, Type Code, CODE0/9,* *8, Other Useful Transmission Settings

Page 33

TO CHANGE THE REMOTE CONTROL CODE

If the fax machine is connected to anextension that oper- ates in tone dialling mode and is set up for manual reception, whenever there is a call from a correspondent wishing to send you a document, you canset it to receive the document by typing the code** on the extension. This

operation has the same effect as pressing the key on the fax machine.

You can replace the second "asterisk" of this code using digits from 0 to 9.

If the fax machine is connected to an external answering machine, we recommend you choose a different digit from the one used to control the machine from a remote location.

Until the display shows:

INSTALLATION

The display shows:

TEL. LINE SET-UP

The display shows the line to which the fax machine was set to be connected, for example:

PUBL.LINE (PSTN)

Until the display shows:

REMOTE START:ON

The display shows the code you set previously, for ex- ample:

TYPE CODE

CODE(0/9,*) *8

- Type the new code, for example: "*9".

To confirm your choice.

To return the fax machine to the initial stand-by mode.

NOTE

If you want to disable this function, after the fourth step, press the /} keys to display: "REMOTE START:OFF", then press

the key to confirm and the key to return the fax machine to the initial stand-by mode.

nOTE

If you are connected to a private line, follow the same proce- dure until the display shows "PUBL.LINE (PSTN)", press the /} keys to display: "PRIV.LINE (PBX)" and then con- tinue as described in the procedure.

OTHER USEFUL TRANSMISSION SETTINGS

TO CHANGE THE POSITION OF YOUR NAME AND FAX

NUMBER

The information in the heading of the document to be sent (name, fax number, date and time and number of pages) may be received by your correspondent's fax machine outside the text area immediately below the top edge of the sheet or inside the text area, slightly lower down than in the previous case.

Your fax machine is designed to send this information inside the text area.

To change the position

Until the display shows:

FAX SET-UP

The display shows:

DATE AND TIME

The display shows:

VARIOUS SETTINGS

Until the display shows:

HEADER INSIDE

/} To select the alternative parameter.

HEADER OUTSIDE

To confirm the setting.

To return the fax machine to the initial stand-by mode.

TO ENABLE/DISABLE REPETITION OF A FAILED

TRANSMISSION FROM THE MEMORY

Until the display shows:

FAX SET-UP

The display shows:

DATE AND TIME

The display shows:

VARIOUS SETTINGS

Until the display shows:

RETRANS.DOC.:OFF

/} To view the other available option: "RETRANS. DOC.: ON".

To confirm your choice.

To return the fax machine to the initial stand-by mode.

27

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Ink Jet Fax Publishedby Installation Quick GuideAdd some printing paper Insert the print head Transmission When the telephone rings, liftReception CopyingTable of Contents Page Introduction To Connect IT to the Telephone Line Operations Essential for Correct OperationOther Devices Case 3 Connection Austria Cord FAX Case 2 Connection Cord FAXTo Connect IT to the Power Supply To Connect the Telephone HandsetTo SET the Language and the Country Destination To ADD Paper To SET the Date and TimeFORMATA4 To Install the Print HeadAutomatic Check Print Head INK LOWPrint Head Precautions To Change the Date and TimeALL That is Missing NOW is Your Name FAX Number To SET IT UP for the Telephone Line Figure shows the external and internal parts of fax machine ComponentsConsole Display Basic Transmission and Reception Operations DimensionsTo Send a Document Document ReadyTo start sending the document OFF HookPress the key If you want to abort the transmission in progress, pressType Time Hhmm Delayed TXType FAX Number NUM/TOUCH/SPEED Automatic TX ATTX from Memory Print SETTING?Automatic Memory TX To Receive a DocumentTo SET ONE-TOUCH and Speed Dialling Coded Speed Dial Edit Another YESType Speed no O1TEL noIncoming Calls Address Book Code orTo Print Reports and Lists Fax machine prints the following reportsDelay List on Failed TX ReportBROADC. REP.ON Print Settings Print InstallPrint OUT Report Last TX ReportTo Telephone with ONE-TOUCH Dialling To Make a CallTo Telephone with Speed Dialling To Telephone by Running a Search Phone BookNumbers What Documents can be Copied To Make a CopyTo Make a Copy Copy High QualMore Sophisticated Operations Other Useful Reception SettingsTEL. Line SETU-UP Ring VolumehighCaller ID on Ring COUNT02DISTINC.RINGOFF FAX/TEL TIMER20Change Pattern AUTODETECT. RingRemote Starton Other Useful Transmission SettingsType Code CODE0/9,* *8Buzzer VOL.LOW Line MonitoroffTX Speed ECM onPolling RX SENDING/RECEIVING a Document Polling ModePolling TX For example 1820 and then press the . The dis- play showsFor Minor Problems Troubleshooting GuideWhat Happens if the Paper or INK has RUN OUT If the Transmission is UnsuccessfulCode Message Cause of Error What to do Error CodesSignals and Messages TX Error System Error NNRX in Memory DiallingMaintenance Operations Cleaning the Print Head and Testing NozzlesTo Replace the Print Head To Clean the Nozzles of the Print Head To Clean the Electrical Contacts Print HeadTo Clean the Optical Reader Only for monochrome print heads blackTo Remove Jammed Documents To Clean the CasingTo Remove Jammed Sheets of Paper If the paper gets jammed in the ASFTo Install the Linkfax PRO Software Software Installation RequirementsInstalling the Software in Windows 2000 Windows XP Minimum Requirements of the PCTroubleshooting Guide To Uninstall the Linkfax PRO SoftwareAccessing the ON-LINE Documentation All four Windows environments 98 Second Edition/ME/ 2000/XPTechnical Data Manual feedingAutomatic feeding Page Monochrome print head part number 255933Y
Top Page Image Contents