Ultra electronic ID Card Printer manual Names of parts on the operation Panel

Page 23

Before use

Names of parts on the operation

panel

LCD panel

	READY	RESET	MENU
	ERROR	RESET	MENU
	ERROR
		EXIT	ENTER

	Buzzar	Control buttons
	Operation display LED	Control buttons
	Operation display LED

Setting buttons

Initializes the printer is reset by the

RESET software when an error occurs or an error is cancelled.

The user mode setting is displayed when the unit is in the Ready or

MENU Preheating status. The button is also used when canceling the operation lock during errors.

Confirms the mode selected in the

ENTER user mode setting.

The parameter setting for each mode can be adjusted during the user mode setting.

Make sure to press the button to save the settings.

EXIT

Quits setting and returns to the upper level setting screen.

Operation display LED

READY LED (green)

ON	: unit ready, printer in operation
Flashing : receiving image data
OFF	: unit stopped due to error, or unit being
	set, initialized or preheated.

READY LED (red)

ON : operation error

OFF : normal status

If an error occurs while the buzzer is set to ON, an alarm will sound. If this happens, the LCD background color will change to red.

LCD panel

During normal operation

Upper line : operation status display

(For details concerning the operation display, see p. 23 of this manual.)

Lower line : counter display

(Toggles between free counter/head counter and total counter.)

If an error occurs Displays the error status.

(For details concerning the error display, see p. 41 ~ 43 of this manual.)

During user mode

Displays various setting modes.

(For details concerning settings, see p. 26 in this manual.)

Display background color

Bright green :		Initialization
Orange	:	Card feeding
Red	:	Error

The above background colors can be selected in user mode settings.

(For details concerning settings, see p. 28 in this manual.)

22

Image 23

Contents ID Card Printer Magicard Prima Re-transfer Laminating Printer Declaration of Conformity Machine Noise For USA onlyContents Do not touch the machine with wet hands Do not touch the power plug during electrical StormsDo not use a line voltage other than instructed Do not wet the machine with waterDo not touch the power plug with a wet hand Do not use the machine while it has a faultPull out the power plug before cleaning Machine Hold the body of the power plug when pulling it OutHandling of transfer film Ink ribbons and cards Product featuresChecking accessories Before useInstallation Names of parts Set the Scsi ID Connecting with a host computerSet the BUS switches Set-upConnect the IC unit with the host computer Connecting the IC unit Sold separatelyConnect the printer and IC unit Connect the compact IC unit to the host computer Connecting the power cordPlug the power cable into the printer Compact IC unit sold separatelyDischarging the card Installing the card stackerMount the card stacker on the printer Hang the stacker claw on the stacker receptacleWind the ribbon, taking up the slack Setting the ink ribbonRemove the ink ribbon cassette Place the cassette upright on a flat surface during set-upClose the printer door When the ink ribbon is wound up to the endInsert the cassette along the guide rail Remove the retransfer film cassette Setting the retransfer filmOpen the printer door and insert the cassette Setting the number of frames to be usedWhen the retransfer film is wound up to the end Wind the retransfer film to take up the slackOpen the card tray Setting cardsClose the card tray Card bracket locks when it reaches the holeInserting cards Unit can take about 300 0.76mm-thick cards Pull the card bracket backFor ISO cards When using magnetic cards Loading cardsWhen using contact IC cards For JIS II cardsRemove the blue securing screw Switching the card thicknessRemove the card thickness switching plate Malfunction of the printerNames of parts on the operation Panel LCD operation display content Operation display LED contents LCD panelOperation Turning on the power Initialized without winding up. Default Turning off the powerAbout the Reset button Turn off the printer’s powerUser modes User mode screen flowMain menu Submenu User mode settingsDisplay mode settings Clearing the free counter Cleaning modePress Enter to reset Exit user modeInk mode setting Set the retransfer speed Retransfer mode settingSet the retransfer temperature Set retransfer filmBuzzer mode setting Setting the bend remedy mode Test print Card size setting modeAntimagnetic setting mode Transport modeRemove the cleaning unit Care and cleaningCleaning the cleaning rollers Wipe the head indicated with horizontally Cleaning the thermal headHow to attach the sponge Cleaning the fan filter on the back sideTurn off the power after the cleaning card is discharged Cleaning the card feed rollersSet a cleaning card From user mode select cleaning modeSet the card on the card tray Cleaning the card feed rollers Heat rollersOnce printer servicing and cleaning Have been completed Apply alcohol on the magnetic head cleaning cardCard turnover table TroubleshootingCleaning rollers Layout of rollers inside the printerMeaning of reset → enter buttons in the list is Error code listingTroubleshooting Mending broken ink ribbon Retransfer film About printing errorsPush the card tray back into position on an angle Removing card jamsReturn the card tray to its original position Remove the card Remove any jammed cardsJog lever are supplied as standard Turn the jog dialMain specifications SpecificationsUnit/mm External appearance and dimensionsFront view Ultra Electronics Card Systems