(to the next page)
Clearing the free counter
Reset the free counter.
The [Total] counter and [Head] counter cannot be reset.
Cleaning mode
The printer is provided with an operation mode for cleaning the magnetic head and card feed roller to keep the printer in the best condition.
See p.38 and p.39 for executing the cleaning mode.
> C o u n t e r R e s e t
O K ?
Press ENTER to reset.
(The electronic beep sounds .)
EXIT
Exit user mode.
> C l e a n i n g >
ENTER
To check that the counter is reset to zero, select “Free Counter” in “Setting the counter type” on p.28.
CAUTION
The head counter is cleared to zero each time the thermal head is replaced.
> > R o l l e r s | ENTER | Execution |
|
| (The electronic |
| O K ? | beep sounds.) |
|
| |
Select the | ENTER |
|
cleaning item with | for | |
| and press | execution. |
|
|
> > MG H e a d | ENTER |
| O K ? |
| (The electronic |
| beep sounds .) |
To exit the cleaning mode, turn off the power after cleaning.
29