Ultra electronic ID Card Printer manual Specifications, Main specifications

Page 47

Specifications

Main specifications			CX21ICL Series (Large-type IC unit)
Main specifications			Power supply	: Fed from the printer.
				DC 5V±5%, DC 12V±5%, DC 24V±5%
				DC 5V±5%, DC 12V±5%, DC 24V±5%
Recording method	: Sublimation type retransfer		Current dissipation : 500mA, 300mA, 1A
Feed format	: Automatic feed		Mass	: 3.5kg
Recording density	: 300 dpi		Dimension (mm)	: 110(W) ⋅ 221(D) ⋅ 255(H)
Expression gradation : 256 gradations for each color			Accessories	: Joint plate ⋅ 1
Printing time	: Approx. 29 seconds (for single-			Inter-unit cable ⋅ 1
	sided printing, excluding data
	transfer time)		CX21ICS Series (Compact IC unit)
Interface	: Compliant with SCSI II (standard)		Power supply	: Fed from the printer.
Operating environment conditions			Mass	: 0.5kg
	Temperature: 15°C ~ 30°C		Dimension (mm)	: 50(W) ⋅ 152(D) ⋅ 115(H)
	Humidity: 35% ~ 70% (no		Accessories	: Screw (with washer) ⋅ 3
	condensation)			Screw (without washer) ⋅ 2
Storage environment conditions
	Temperature: -15°C ~ 55°C
	Humidity: 20% ~ 80%
Power supply	: 100~120ACV/220~240ACV
	(allowance±10%)
Current dissipation : 7.0A (for 100V system)/5.0A (for
	200V system)
Mass	: Standard 22kg
	Excluding the built-in magnetic
	encoder
Accessories	: Power cable for 120ACV ......... 1
	Dark gray (North America)
	for 220 ~ 240ACV .................... 1
	(Europe)	⋅1
	Cleaning card	⋅1
	Instruction manual English	⋅1
	Card stacker	⋅1
	Ink ribbon cassette	⋅1
	Retransfer film cassette	⋅1
	Ferrite core	⋅2
	(Standard model: 1 unit, built-in
	IC encoder model: 2 units)	⋅4
	Binder	⋅4
	(Standard model: 2 units, built-in
	IC encoder model: 4 units)
	Jog lever (contained in the	⋅1
	card tray)	⋅1

Products sold separately

:Ink ribbon, retransfer film 1,000 frames/set

:Cleaning card

10cards/set Model: CX210-CC1

: Compact IC unit Non-contact IC encoder

: Large-type IC unit

Mounts either a Non-contact or contact IC encoder.

The specifications and external appearance of this product are subject to change for improvements without a prior notice.

46

Image 47

Contents ID Card Printer Magicard Prima Re-transfer Laminating Printer Declaration of Conformity Machine Noise For USA onlyContents Do not touch the machine with wet hands Do not touch the power plug during electrical StormsDo not use a line voltage other than instructed Do not wet the machine with waterDo not touch the power plug with a wet hand Do not use the machine while it has a faultPull out the power plug before cleaning Machine Hold the body of the power plug when pulling it OutHandling of transfer film Ink ribbons and cards Product featuresChecking accessories Before useInstallation Names of parts Set the Scsi ID Connecting with a host computerSet the BUS switches Set-upConnect the IC unit with the host computer Connecting the IC unit Sold separatelyConnect the printer and IC unit Connect the compact IC unit to the host computer Connecting the power cordPlug the power cable into the printer Compact IC unit sold separatelyDischarging the card Installing the card stackerMount the card stacker on the printer Hang the stacker claw on the stacker receptacleWind the ribbon, taking up the slack Setting the ink ribbonRemove the ink ribbon cassette Place the cassette upright on a flat surface during set-upClose the printer door When the ink ribbon is wound up to the endInsert the cassette along the guide rail Remove the retransfer film cassette Setting the retransfer filmOpen the printer door and insert the cassette Setting the number of frames to be usedWhen the retransfer film is wound up to the end Wind the retransfer film to take up the slackOpen the card tray Setting cardsClose the card tray Card bracket locks when it reaches the holeInserting cards Unit can take about 300 0.76mm-thick cards Pull the card bracket backFor ISO cards When using magnetic cards Loading cardsWhen using contact IC cards For JIS II cardsRemove the blue securing screw Switching the card thicknessRemove the card thickness switching plate Malfunction of the printerNames of parts on the operation Panel LCD operation display content Operation display LED contents LCD panelOperation Turning on the power Initialized without winding up. Default Turning off the powerAbout the Reset button Turn off the printer’s powerUser modes User mode screen flowMain menu Submenu User mode settingsDisplay mode settings Clearing the free counter Cleaning modePress Enter to reset Exit user modeInk mode setting Set the retransfer speed Retransfer mode settingSet the retransfer temperature Set retransfer filmBuzzer mode setting Setting the bend remedy mode Test print Card size setting modeAntimagnetic setting mode Transport modeRemove the cleaning unit Care and cleaningCleaning the cleaning rollers Wipe the head indicated with horizontally Cleaning the thermal headHow to attach the sponge Cleaning the fan filter on the back sideTurn off the power after the cleaning card is discharged Cleaning the card feed rollersSet a cleaning card From user mode select cleaning modeSet the card on the card tray Cleaning the card feed rollers Heat rollersOnce printer servicing and cleaning Have been completed Apply alcohol on the magnetic head cleaning cardCard turnover table TroubleshootingCleaning rollers Layout of rollers inside the printerMeaning of reset → enter buttons in the list is Error code listingTroubleshooting Mending broken ink ribbon Retransfer film About printing errorsPush the card tray back into position on an angle Removing card jamsReturn the card tray to its original position Remove the card Remove any jammed cardsJog lever are supplied as standard Turn the jog dialMain specifications SpecificationsUnit/mm External appearance and dimensionsFront view Ultra Electronics Card Systems