Tael HK general, Singapore | A&D MC-30K, MC-10K manual

A&D MC-30K, MC-10K manual Tael HK general, Singapore

Page 15

The tables below indicate the weighing capacity and the minimum display for each unit, depending on the balance model.

When a measurement unit other than gram is used, it is not possible to weight up to capacity of the balance because the display does not have sufficient digits.

Use the MC series balance within the values shown in the tables below.

			MC-10K
Unit
Unit	Capacity		Gram		Minimum
					display

Gram	10100 g		10100	g	0.001
Kilogram	10.1 kg		10100	g	0.000001
Ounce (Avoir)	197	OZ	5600	g	0.00005
Troy Ounce	199	OZt	6200	g	0.00005
Metric Carat	19500 ct		3900	g	0.005
Momme	1973 mom		7400	g	0.0005
Pennyweight	6494 dwt		10100	g	0.001
Grain (UK)	155866	GN	10100	g	0.02
Tael (HK general, Singapore)	198	TL	7500	g	0.00005
Tael (HK jewelry)	195	TL	7300	g	0.00005
Tael (Taiwan)	194	TL	7300	g	0.00005
Tael (China)	198	TL	6200	g	0.00005
Tola (India)	865 t		10100	g	0.0001
Messghal	1984	MS	9300	g	0.0005

			MC-30K
Unit
Unit	Capacity		Gram		Minimum
					display

Gram	31000 g		31000	g	0.01
Kilogram	31.0 kg		31000	g	0.00001
Ounce (Avoir)	1093	OZ	31000	g	0.0005
Troy Ounce	966	OZt	31000	g	0.0005
Metric Carat	155000 ct		31000	g	0.05
Momme	8266 mom		31000	g	0.005
Pennyweight	1933 dwt		31000	g	0.01
Grain (UK)	478403	GN	31000	g	0.2
Tael (HK general, Singapore)	820	TL	31000	g	0.0005
Tael (HK jewelry)	828	TL	31000	g	0.0005
Tael (Taiwan)	826	TL	31000	g	0.0005
Tael (China)	992	TL	31000	g	0.0005
Tola (India)	2657 t		31000	g	0.001
Messghal	6613	MS	31000	g	0.005
		13

Image 15

Contents

1WMPD4002203A MC-10K MC-30KAll rights reserved This Manual and MarksContents 10-5 10-614-1-1 Averaging Range f1-b and Averaging Time f1-t 14-1-2 Features IntroductionAbout This Manual Compliance with the following Council Directives ComplianceTo keep waterproof Dustproof Unpacking And Installing The BalanceAuto-centering Pan AX-MC10K/30KPAN Installation Procedure Earth Installing the BalanceBefore Use Precautions After Use During UsePower Supply Display Display Symbols And Key OperationKey When pressed and released When pressed and held Key OperationsWeighing Units Tael HK general, Singapore F1l Filter Used Display Selecting a Weighing Unit ModeWeighing Basic WeighingWhen Building into a System Weighing Speed Adjustment Self Check Function with Response Adjustment Balance during adjustmentDo not allow vibration or drafts to affect Calibration Calibration GroupTerms Automatic self calibration due to changes in temperature Automatic Self Calibration150 g ~ +0.159 g Calibration using the internal mass One-Touch CalibrationAbout the internal mass When the MC-10K is used Calibration Using an External WeightStep Confirm that there is nothing on the pan and press Calibration Test Using an External WeightPrint key...... To store the new weight value. Even if Remove Remove the weight from the pan Step Balance displaysCorrecting the Internal Mass Value Key Permit or Inhibit Function Switch And InitializationStep Press Key to display To cancel This operation, press KeyInitializing the Balance Step Press KeyDisplay and Operation Keys Check the settings and condition before changing parametersFunction Table Structure and Sequence of the Function TableDetails of the Function Table LO buzzer Data output modeCp fnc Cp-b BepDout ID number output TimeoutAK, Error code Time/Date outputF1-t ID number settingInternal mass correction F1-b Averaging range for First moving AverageStability band width 5t-b Zero upon power-on p-trDescription of the Class Environment, Display Condition CondAuto print modes a and B Description of the Item Data Output ModeKey mode Stream modeDP Dump print format 5if type Interval memory modeDescription of the Item Data Format Standard format 5if typeCSV format KF formatMT format NU numerical format 5if typeTare value Data numberDate TimeOverload Negative errorData Format Examples StableSetting the ID Number ID Number And GLP ReportDisplay character set Terminator, CR , LF or CR Calibration report using the internal massGLP Report Space, Ascii 20hCalibration report using an external weight Calibration test report using an external weightSignature Space, Ascii 20h Title block and end block OperationEnd block Sub 25 pin assignments Standard Input And Output InterfaceRS-232C and External Contact Input Sub 25 pin numbersRS-232C Terminals External contact inputOption Data output pause SettingsNot Auto print polarity NecessaryRsKey Using Windows Communication Tools Software WinCTUsing the WinCT software, the balance can do the following RsComCommand List CommandsAcknowledge Code and Error Codes Personal computer Time Balance Command Weighing mode Control Using CTS and RTSSettings Related to RS-232C CommandExtended Function Page Page Treatment of the Balance MaintenanceWeighing method TroubleshootingChecking the Balance Performance and Environment Checking that the balance performs properly16-2 Clock battery error Automatic response adjustment zero errorAutomatic response adjustment unstable error Internal errorAsking for Repair Other DisplaySpecifications Unit mm External DimensionsAD-8121B Printer AD-8922A Remote controllerOptions and Peripheral Instruments AX-MC10K/30KPAN Auto-centering PanData Logger Rechargeable BatteryFoot Switch Weighing Environment LoggerTerms Terms/IndexNothing is on the weighing pan Memory functionIndex Keys and symbolsFUl ErrorMode MT format F1lPage Instruments India Private Limited UK OfficeGerman Sales Office Korea Limited

A&D MC-30K, MC-10K manual Tael HK general, Singapore

Tael (HK general, Singapore)