80Modem Access
Modem access:Y | 7. | Press CHNG. | |
CHNG | OK |
|
|
Modem access:N | 8. | Press ®. | |
CHNG | OK |
|
|
Connecting to the CallPilot system
To connect to the CallPilot system you must:
•configure your modem to access the CallPilot modem
•connect to the CallPilot modem
Configuring your modem to access the CallPilot modem
The CallPilot modem requires a special configuration for access. This requirement helps prevent unauthorized access to the CallPilot system.
To configure your modem:
1Open the folder that contains the Nortel Networks Modem Configuration Utility. (CPsecureModem.exe).
2Double click CPsecureModem.exe. The Modem Configuration Utility opens.
3Select the Configure Modem for Secure Access option.
4Click the OK button.
The Configuration Complete dialog box appears.
5Click the OK button.
6In you are using Windows NT 4.0, restart your computer.
After your computer finishes restarting, the modem is ready to connect to the CallPilot modem.
Connecting to the CallPilot modem
To connect to the CallPilot system:
1Use the Start menu to open the
2Double click the
3Set the User ID to CallPilot.
4Set the Password to administrator.
5If there is a Domain box, set the Domain to the IP address you entered for the
6Click the Connect button.