American Power Conversion SYMSTRF3I SymmetraTM Components Description Specific To Model

SymmetraTM Components	Description
Specific To Model:
SYMSTRF3I
Input Circuit Breaker	Connects Symmetra to the utility power source. Protects the system against
	extreme overloads when in the on line mode.
Input/Output Wiring Panels	The wiring panel and cover plate are shipped in the accessories box with the
	user manual. The electrician installs these when wiring the Symmetra.
Bypass Transformer Wiring Panels	An optional bypass transformer is wired to a terminal connection block located
	behind these panels.
Convenience Power Panel	Eight IEC 320 C13 type power outlets (220V-240V). Arranged in two sets of
	four plugs, protected to 10Amp maximum outputs.
	Only used when no bypass transformer option is installed. Protects the system
Bypass Circuit Breaker	against extreme overloads when in bypass mode. If a bypass transformer is
	included with the system, a cover plate must be installed over this switch.
	Manual control of the bypass function. When the maintenance bypass switch
Maintenance Bypasss Switch	is in the "on" position, power is delivered directly from utility power source to
	the load equipment.

Note: This table applies to model SYMSTRF3I only.

990-7163-001 Introduction - Page 5