Power Module Installation
1.Align the runners of a power module with the alignment grooves in the bottom module bay. Firmly slide the power module into the frame until the
2.Swing the flip latch up and fasten the screw to the power module. Do not overtighten.
3.Follow this procedure to install all power modules.
Notice!
νPower modules are installed on the left, battery modules are installed on the right.
νAlways install power modules into the lowest available bay.
νIf the power modules were installed at the factory, remove each of the shipping retainers that secured the modules during shipping. Secure the flip latches.
Page 2 - | |
|