5.Enter following items according to the capabilities of recipi- ent facsimile, and click [Save].
SUB — Enter the mailbox number if you want to send originals to the mailbox in the recipient facsimile. You can enter up to 20 characters including numbers and hyphenations
SID — Enter the password to input a fax into the mailbox in the recipient facsim- ile. You can enter up to 20 characters including numbers and hyphenations
SEP — Enter the mailbox number if you want to retrieve a document from the mailbox in the recipient facsimile. You can enter up to 20 characters including numbers and hyphenations
PWD — Enter the password to retrieve a document from the mailbox in the recip- ient facsimile. You can enter up to 20 characters including numbers and hyphen- ations
ECM — Enable or disable the ECM (Error Correction Mode). If enabled, it facili- tates error free communications by automatically resending any portion of the document affected by phone line noise or distortion.
Line Select — Select the line to be used. If this is set to “OFF”, this equipment automatically selects the line to be used. However, “LINE 2” can be applicable only when the optional line 2 board is installed.
Quality Transmit — Select if you want to send documents in the Quality TX mode. This feature sends documents at a slower speed than a normal so that the transmission will be less affected by line condition.
Transmission Type — Select whether the document will be sent in the Memory TX mode or Direct TX mode.
SUPPLEMENT: • If you want to clear the fax settings of the contact, click [Reset].
Network Operator’s Guide — Managing Address Book | 65 |