Toshiba E6581830 instruction manual Description of monitor code, 0DH

E658130

5.5.11.Description of monitor code

Divide the monitor code (RWw n) into half and select the monitor value 1 (RWr n) from the lower 8 bits and the monitor value 2 (RWr n) from the upper 8 bits.

For Example: When output voltage is selected for the monitor value 1 and output torque is selected for the monitor value 2. -> The monitor code is 0703H.

Address	Upper 8 bits	Lower 8 bits
RWw n	Monitor value 2	Monitor value 1
RWw n+4	-	Monitor value 3
RWw n+5	-	Monitor value 4
RWw n+6	-	Monitor value 5
RWw n+7	-	Monitor value 6

Monitor code (When an invalid monitor code is set up, monitor value fixes to 0.)

Code Number	Second Monitor Description	First Monitor Description	Unit
	(upper 8 bits)	(lower 8 bits)
00H	Output frequency	None monitor (Monitor value is 0)	0.01Hz
	(Only the second monitor )
01H	Output frequency	Output frequency	0.01Hz
02H	Output current	Output current	0.01A
03H	Output voltage	Output voltage	0.1V
04H	None monitor (Monitor value is 0)	None monitor (Monitor value is 0)	－
05H	Frequency command value	Frequency command value	0.01Hz
06H	Output speed	Output speed	1min-1
07H	Output torque (With sign)	Output torque (With sign)	0.1%
08H	DC voltage	DC voltage	0.1V
09H	PBR load factor	PBR load factor	0.1%
0AH	Motor overload factor	Motor overload factor	0.1%
0BH・0CH	None monitor (Monitor value is 0)	None monitor (Monitor value is 0)	－
0DH	Input power	Input power	0.01kW
0EH	Output power	Output power	0.01kW
0FH	Input terminal information	Input terminal information	－
10H	Output terminal information	Output terminal information	－
11H	Output current	Output current	0.1%
12H	Exciting current	Exciting current	0.01A
13H	None monitor (Monitor value is 0)	None monitor (Monitor value is 0)	－
14H	Cumulative operation time	Cumulative operation time	1h
15H・16H	None monitor (Monitor value is 0)	None monitor (Monitor value is 0)	－
17H	Accumulation power supply ON time	Accumulation power supply ON time	1h
18H	Motor overload factor	Motor overload factor	0.1%
19H	Integral input power	Integral input power	1kWh
1AH	Integral output power	Integral output power	1kWh
1BH	Analog input(VIA)	Analog input(VIA)	0.01%
1CH	Analog input(VIB) (With sign)	Analog input(VIB) (With sign)	0.01%
1DH	Analog input(VIC)	Analog input(VIC)	0.01%
1EH・1FH	None monitor (Monitor value is 0)	None monitor (Monitor value is 0)	－
21H	Torque current (With sign)	Torque current (With sign)	0.1%
22H	None monitor (Monitor value is 0)	None monitor (Monitor value is 0)	－
23H	Factory specific monitor	Factory specific monitor	―
24H	PID feedback value	PID feedback value	0.01Hz

- 33 -