Allied Telesis 9100, 9102, 9103 Who Should Read This Guide?, About this Guide, Reason for Update

Page 2

Introduction

Congratulations on your purchase of a Allied Telesyn™ 910x, integrated Multiservice Access Platform (iMAP) product. This product is part of a family of products that leverages Ethernet switching technology to offer service providers a range of services, including video over xDSL.

Who Should Read This Guide?

This document provides an outline for installation and turn up of the Allied Telesyn 910x product, from the unpacking of materials to setting up the initial user interface. The product is then ready to be introduced to the network.

About this Guide

This guide includes

•Section 1 provides step-by-step instructions for installing the Allied Telesyn 910x, from unpacking the chassis to monitoring initialization from the local (CONSOLE) interface.

•The Appendix gives a list of Glossary Terms as well as a worksheet for office records.

Reason for Update

This is the first release for this product.

© 2005 Allied Telesyn Networks. All rights reserved. Information subject to change without notice.

Image 2

Contents Page About this Guide Reason for UpdateWho Should Read This Guide? Table of Contents Appendix Installation Overview for Allied Telesyn 9100 ConfigurationFollowing Procedures for the 9101, 9102, Selecting a Site for1 9101 Site Requirements 2Site Requirements for Allied Telesyn2 9102/9103 Site Requirements 3Site Requirements for Allied Telesyn 91029102/9103 Site Requirements Selecting a Site for 5Customer Item Checklist Setup Checklist4Part Checklist for 1 9101 Parts Included in Order2 9102 / 9103 Parts Included in Order 6Part Checklist for7Part Checklist for 1 9101 Mounting Options 8Customer Item ChecklistShelf Mounting Options 4Front mount option for Shelf Mounting Options Center Mounting Option 2 9102/3 Mounting Options 6Front Mount for 9102/37Mid-Mount for 9102/3 Attaching the Extension Brackets and Rear Brackets Wall Mounting Option OverviewSafety Guidelines Allied Telesyn 9100 Installation SafetyInstalling the Wall Mount Safety Precautions While Working with Electricity Electrostatic DischargePrecautions and Conformance Standards Power and Grounding Cautions Installing Power and Ground forLaser Safety Instructions Connect Power and Ground Installing Power and Ground for Connect Power and Ground Connect the -48VDC office power supply to the 9101 PEM plug 129100 PEM plug with connections indicatedConnect to Power Source Single or Dual Apply and Check Power DC Power SupplyAlarm Connections 9101 Optional Apply and Check Power AC Power SupplyInstall Card Modules Install the CFC12Install the Service Module Install the SFP ModuleConfigure Local Terminal or PC Install Filler Plates FPF9Default Asynchronous Port Settings Option DefaultService Modules with RJ21connectors Connect System Cables13.4 GE4/FE2 SMs with RJ45 connectorsSMs with Optical connectors Data Management Cable Mgmt Port on CFC12 Apply Power and Check Startup Sequence Page Check management interfaces Check the configurationCheck software load Adding AC Power Module Allied Telesyn Contact InformationAppendix Glossary of TermsTelesyn 9100 Inventory Form 1Registration Information for the Telesyn