Allied Telesis 9100, 9103 manual Following Procedures for the 9101, 9102, Selecting a Site for

Page 6

Following Procedures for the 9101, 9102, and 9103	Allied Telesyn 9100 Configuration

[

FIGURE 1-1Allied Telesyn 9101 - Example Configuration

FIGURE 1-2Allied Telesyn 9102 / 9103 - Example Configuration

Note the following differences between the 9102/3 and the 9101:

•The 9102/3 is deeper and so has different environment / mounting options (refer to 1.5.2).

•Power and Grounding for the 9102/3 is for an AC Power Supply, and so there is no PEM (refer to 1.9).

Note: The AC Power Supply Module must have power input that meets specifications listed in the Allied Telesyn MAP Component Specification.

1.2 Following Procedures for the 9101, 9102, and 9103

Most of the procedures for installing the 9100 product are the same, with the main difference the options for pro- viding power.

Most steps in this Guide apply to all three product types and are referred to as the 9100 product. When a proce- dure is specifically for a 9101, 9102, or 9103, there is a separate heading.

1.3 Selecting a Site for the 9100

Before installing the Allied Telesyn 9101, prepare the site to ensure the product will operate in the correct envi- ronment, all materials meet specifications, and all installation tasks can be performed.

1-2Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100)

Image 6

Contents Page Reason for Update Who Should Read This Guide?About this Guide Table of Contents Appendix Installation Overview for Allied Telesyn 9100 ConfigurationFollowing Procedures for the 9101, 9102, Selecting a Site for1 9101 Site Requirements 2Site Requirements for Allied Telesyn2 9102/9103 Site Requirements 3Site Requirements for Allied Telesyn 91029102/9103 Site Requirements Selecting a Site for 5Customer Item Checklist Setup Checklist4Part Checklist for 1 9101 Parts Included in Order6Part Checklist for 7Part Checklist for2 9102 / 9103 Parts Included in Order 8Customer Item Checklist Shelf Mounting Options1 9101 Mounting Options 4Front mount option for Shelf Mounting Options Center Mounting Option 2 9102/3 Mounting Options 6Front Mount for 9102/37Mid-Mount for 9102/3 Attaching the Extension Brackets and Rear Brackets Wall Mounting Option OverviewAllied Telesyn 9100 Installation Safety Installing the Wall MountSafety Guidelines Safety Precautions While Working with Electricity Electrostatic DischargePrecautions and Conformance Standards Installing Power and Ground for Laser Safety InstructionsPower and Grounding Cautions Connect Power and Ground Installing Power and Ground for Connect Power and Ground Connect the -48VDC office power supply to the 9101 PEM plug 129100 PEM plug with connections indicatedConnect to Power Source Single or Dual Apply and Check Power DC Power SupplyAlarm Connections 9101 Optional Apply and Check Power AC Power SupplyInstall Card Modules Install the CFC12Install the Service Module Install the SFP ModuleConfigure Local Terminal or PC Install Filler Plates FPF9Default Asynchronous Port Settings Option DefaultService Modules with RJ21connectors Connect System CablesSMs with RJ45 connectors SMs with Optical connectors13.4 GE4/FE2 Data Management Cable Mgmt Port on CFC12 Apply Power and Check Startup Sequence Page Check the configuration Check software loadCheck management interfaces Adding AC Power Module Allied Telesyn Contact InformationAppendix Glossary of TermsTelesyn 9100 Inventory Form 1Registration Information for the Telesyn