Precautions and Conformance Standards | Allied Telesis 9103, 9102

Precautions and Conformance Standards	Allied Telesyn 9100 Installation Safety

3.Connect the clip from the ESD-preventative device to an unpainted surface of the frame, rack or ESD point on the chassis frame connecting it directly to ground. This ensures that unwanted ESD voltages safely flow to ground.

4.Wear the ESD-preventive device correctly to properly guard against ESD damage and shock. If no foot or wrist strap is available, the user should ground themselves by making contact with an unpainted, metal part of the chassis.

1.7.4 Precautions and Conformance Standards

FCC - The Allied Telesyn 9101/9102/9103 product complies with FCC requirements for emissions radiation. Users of the Allied Telesyn 9101/ 9102/9103 product are cautioned that any changes or modifications not expressly approved by the party responsible for FCC compliance could void the user’s authority to operate the product.

ALL COUNTRIES: Install product in accordance with local and

National Electrical Codes.

This equipment conforms to the following European Community standards:

•EN55022: 1998 Information Technology Equipment—Radio disturbance

•EN55024: 1998 Information Technology Equipment—Immunity characteristics—Limits and methods of measurement.

•EN60950: 2000 Safety of Information Technology Equipment, including electrical business equipment.

•EN60825-1: 1994 Safety of Laser Products - part 1: Equipment classification, requirements and user’s guide.

•EN61000-3-2: 1995 Electromagnetic compatibility (EMC) - part 3-2: Limits for harmonic current emis- sions (equipment input current up to and including 16A per phase).

•EN61000-3-3: 1995 Electromagnetic compatibility (EMC) - part 3-3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up to 16A

Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100)

1-17