Philips 7670, 7620 manual Playback, Menu

HW.qxd 17.06.03 12:05 Seite 6

English

▼

Deutsch￿￿￿￿￿▼ Français￿￿￿￿￿▼ Nederlands￿￿￿￿￿▼ Italiano￿￿￿￿￿￿￿￿￿￿▼ Español

▼

êÛÒÒÍËÈ

Playback

Press and hold the PLAY/PAUSE/REMAIN button during normal playback to display the remaining duration of the current file.

	1. Normal Playback
1.	Press the FOLDER/REPEAT button to select the
	desired folder (A, B, C, or D).
	If you do not select a folder, the last folder to
	which you recorded will be played.
2.	Press the PLAY/PAUSE/REMAIN button to start
	playback. The green LED will light and the	Figure 10
	duration of the recording will be displayed
	(Figure 10).
3.	Press the PLAY/PAUSE/REMAIN button again
	to pause playback.
4.	Press the PLAY/PAUSE/REMAIN button again
	to resume playback.

5.Press the STOP/DEL button during Playback or Pause to stop playback.

2.Low-speed Playback

1.Press the REPEAT/FOLDER button to select the desired folder (A, B, C, or D). If you do not select a folder, the folder that you recorded to or played last will be played.

2.Press and hold the PLAY/PAUSE/REMAIN button for approximately 2 seconds to start low-speed playback. The green

LED will light and the duration of the recording will be displayed.

3.Press the PLAY/PAUSE/REMAIN button briefly again during low-speed playback to pause.

4.In Pause, press and hold the PLAY/PAUSE/REMAIN button for approximately 2 seconds to resume low-speed playback or press the button briefly to start normal playback.

5.Press the STOP/DEL button during Playback or Pause to stop playback.

3.Search

1.Press and hold the NEXT button or BACK button for at least a half a second during Playback.

Playback stops and the time on the LCD increases or decreases rapidly.

2.Release the button when you wish to start playback.

3.The search will stop when the end of the current file is reached if

you press and hold the NEXT button or when the beginning

of the current file is reached if you press and hold the

BACK button .

4.Playback of other Files

1.To switch to the next or previous file, press the NEXT button

or BACK button briefly during Playback or Pause.

2.To navigate through all files, press and hold the NEXT button

or BACK button during Stop to switch to the desired file.

Release the button to play the displayed file.

5. Repeat

Repeat Section

1.	Press the FOLDER/REPEAT button where you
	want to start the section repeat. The starting
	point is set and the		indicator flashes
	(Figure 11).			Figure 11
2.	While	is flashing, press the FOLDER/REPEAT
	button again where you want to stop repetition.
	The	indicator lights continuously and the
	selected section will be repeated 10 times
	(Figure 12).
3.	Press STOP/DEL to stop playback.			Figure 12
Repeat File
1.	Press and hold the FOLDER/REPEAT button
	during Playback.
2.	The	indicator will appear and the current
	file will be repeated 9 times (Figure 13).
3.	Press STOP/DEL to stop playback.

Repeat￿Folder Figure 13

1.Press and hold the FOLDER/REPEAT button during Playback.

2.When appears on the LCD (Figure 13), press and hold the FOLDER/REPEAT button again.

3.	appears on the LCD and all files in the
	current folder will be repeated 10 times
	(Figure 14).
4.	Press STOP/DEL to stop playback.
				Figure 14
Menu
	1. Mic Recording Sensitivity
The factory default is high-sensitivity mode.
1.	Press the MENU/HOLD button once during
	Record/Playback/Stop (Figure 16).
2.	Press the NEXT button		or the
	BACK button	.
3.	The mode will toggle between low-sensitivity			Figure 15
	mode (LO SENSE) and high-sensitivity mode
	(HI SENSE) (Figures 15 and 16).
4.	Press the PLAY/PAUSE/REMAIN or the
	STOP/DEL button to select the displayed mode.
5.	The previous operation will be resumed with the
	selected mode.			Figure 16

Note: HI SENSE: Recommended for recording in a quiet environment.

LO SENSE: Recommended for recording in a noisy environment. Put the microphone close to the sound source.