Aiwa CSD-TD59 manual Tape Operation, Playback, Press Tape, Press e PLAY/PAUSE to start playback

C TAPE OPERATION

•Use Type I (normal) tapes only.

•The unit plays (records on) the side facing up.

PLAYBACK

1 Press TAPE.

The power is turned on.

2 Press PUSH EJECT to open the cassette holder and insert a tape with the side to be played facing out and the exposed side facing down.

PUSH EJECT

Press PUSH EJECT to close.

3 Press e PLAY/PAUSE to start playback.

Tape counter

To set the tape counter to “0000”

Press s in stop mode. The counter is also set to “0000” when opening the cassette holder.

s STOP/SET/CLEAR * – Stops play.

*or s STOP on the remote control (CSD-TD59 only) e PLAY/PAUSE – Pauses play. During pause mode, the tape counter flashes. To resume play, press again.

f/g – Rewinds/ fast forwards. To stop the winding, press s.

To start play when the power is off, press TAPE. The power is turned on and play of the loaded tape begins (Direct Play Function).

If you load a tape while the display flashes in step 2, play starts without pressing e.

After listening, press POWER 6 STANDBY/ON to turn the power off.

10ENGLISH