Canon DR-5060F manual About the Power Supply, Carrying

Page 10

About the Power Supply

WARNING

■Be sure to connect to an AC 120V (240 V in Europe) (50/60 Hz) power supply.

■Ensure that the scanner is connected to an independent power outlet. Do not plug the scanner into an outlet shared with another device. If you use an extension cable, pay attention to the total amperage of the cable.

■Be sure to connect the ground cable before using the scanner. Also, never connect the ground cable to gas pipes or water pipes.

■If you are unsure of anything relating to the power supply, contact your store of purchase or your local power company.

■Never place an object on top of the power cord or step on it.

■Never bundle the power cord or wrap the cord around an object such as a table leg.

■Do not tug the power cord. When you remove the power cord, grip it by the plug head.

■Keep the area around the power outlet free of obstacles.

Carrying

When you move the DR-5060F, it should be held by the under section of the main unit by at least two workers, and carried carefully.

WARNING

■When lifting this unit, be sure to hold it by the under section of the main unit, and never place your hands on opening/closing sections such as the upper unit.

■Be sure to move this unit by at least two workers. This unit weighs 48 kg (105.8 lb.). If one worker tries to move this unit by himself, the worker may seriously injure himself.

■Before you move this unit, always turn the power switch OFF and disconnect the power cord from the power outlet. Also, disconnect the SCSI cable from the connector. Moving the scanner with the power still ON or the SCSI cable still connected might result in electrical shock.

8Safety Precautions

Image 10

Contents

Instructions FCC Regulations For 120V models Introduction Scanner This UnitFilmer Contents Chapter Daily Cleaning Chapter TroubleshootingSpecifications Options Consumables Safety Precautions Daily maintenanceSafety Precautions About the Installation Location About the Power Supply CarryingChapter Features of DR-5060F Packaging What’s in the Box? About DR-5060FNames and Functions of Parts Front viewInside with upper unit open Rear viewOperation panel Remaining film indicatorFunction keys Count Only key Backup keySpace/Trailer key New File keyFeeding Option key Indicator lampsStart key Brightness keyDocument eject support plate Removable trayFunction key labels About the Camera Unit Preparation Before Use System Requirements Connecting the Scsi Cable Connecting to a ComputerPreparation Before Use Setting the Scsi ID and Terminator Setting the Scsi IDSetting the terminator Connecting the Power Cord and Ground Cable Connecting the power cordPress the release notch to open the camera unit’s cover Handling the Camera UnitLoading Film Take the microfilm out of its caseClose the left cover taking care not to nip the film Preparation Before Use Affixing the Index Label Close the cover, and make sure that it is lockedLoading the Camera Unit in the DR-5060F Push the camera unit down onto the main unitRemoving the Camera Unit Removing Film Press the release notch to open the cover on the rightRemove the film Store the film in its case Affixing the Document Guide Labels Preparing for Paper Feed and EjectDocument tray extension Open the extension wire Document eject tray extensionDocument eject support plate Paper Feed Adjustment To turn this unit ON, press the power switch Turning the Power ON/OFFTurning the Power on Turn the computer onTurning the Power OFF Turn the computer OFF before you turn the scanner OFFPreparing Documents Backup key out Scanner Only mode Checking the Operation ModeBackup key lit Backup mode Backup key blinking Filmer Only modeCount Only mode Count Only key lit Count Only modeWhen counting ends, press the Count Only key to cancel Preparing DocumentsAbout Documents Types of DocumentsDocument Loading Precautions Setting Scan Conditions Selecting the Feeding Option Remote Semi-Auto Is lowered when scanning of all pages in the document endsSemi-Auto Inserted first into the scannerAuto Sensor Manual Insert the document one page at a time To end scanning, press the Stop keyFunction Key Settings Press the or key to adjust the paper thickness Manual Thickness AdjustmentPress the blinking function key again Fixed Thickness Mode Double Feed DetectionFilm Density Restore Memorized SettingImprinter Odometer IndicationSetting in the User Mode User Mode Setup ItemsLeader feed setting Endorser stamp mode settingSpace feed setting Trailer settingWhen the final letter of the user mode setting is a number How to Set the User modeSelect the user mode address using the or key When the final letter of the user mode setting isTroubleshooting When the Scanner is Not Recognized Paper Jam in the Paper Eject Section TroubleshootingRemoving Paper Jams Eject tray extension if it is openPage Paper Jam in the Feed Section Check the intermediate unit for jammed paperPress the open/close button, and lift up the feed unit Remove the jammed paper from the feed sectionGently close the upper unit Removing the Intermediate Unit Attaching the Intermediate Unit Push the intermediate unit downPaper Feed Trouble Condition Paper jam has occurredCondition Double feed cannot be detected Cause Scan conditions are inappropriate When the Scanned Image is Not NormalCause Scanning glasses and rollers on the scanner are dirty Cause Driver or application does not run correctlyWhen an Error Code is Displayed Cause Lamp has reached the end of its service life Cause Optional imprinter’s ink cartridge is not installedCause Endorser option connection error Cause Document was skewedDaily Cleaning Daily Cleaning Cleaning the Main UnitCleaning the Scanning Glasses and Rollers Daily CleaningOpen the feed unit Use a clean, dry cloth to wipe the scanning glasses Lower the lever Press this part Fit into Deeper Two grooves Memo Cleaning the Camera Unit Power CordImprinter Guide Plate Specifications SCSI-IIImprinter Camera unitEndorser ED600 Bar code decoderPage CANON Electronics INC

Related manuals

Manual 92 pages 34.67 Kb