Loading the Camera Unit in the DR-5060F
Load the camera unit loaded with film.
1 Gently insert the camera unit as far as possible into the slot.
E | FILM | F |
|
| Count Only |
|
| New File |
|
| Feeding Option |
|
| Manual |
|
| Auto |
|
|
2 Push the camera unit down onto the main unit.
Make sure that the camera unit is not riding up from the main unit.
E | FILM | F |
|
| Count Only |
|
| New File |
|
| Feeding Option |
|
| Manual |
|
| Auto |
|
| |
|
| e |
w |
|
|
2
Preparation Before Use
3 Turn the lock lever to the [LOCK] position to lock the camera unit in place.
MEMO
●The film leader is fed automatically if you place a camera unit loaded with new film on this unit in the Backup mode or Filmer Only mode. The cover cannot be opened as the camera unit release notch is locked. (See “Loading Film” P. 25)
●The display indicates the error “F02” if a camera unit not loaded with film or a camera unit, in which the loaded film has come away from the
●In the Scanner Only mode, the leader film is not fed automatically and errors are not displayed.
NOTE
Do not touch the lock lever with your hand while the leader film is being fed.
Handling the Camera Unit 29