Canon DR-5060F manual Safety Precautions

Page 8

CAUTION

The scanner weighs about 48 kg (105.8 lb.). To avoid damage to the unit, never place the unit on an unstable or vibrating surface. The unit may tip or fall over, and cause an injury.

To avoid overheating and causing a fire, never block the air vents on the rear of the scanner.

Keep all liquids, beverages, or any type of liquid, and clips, staples, necklaces or other metal objects away from the unit. If you accidentally spill liquid or drop a metal object into the unit, turn the unit power OFF, disconnect the power cord from the power outlet, and call for service immediately.

Never install the unit in humid or dusty locations. Doing so might cause fire or electrical shock.

Never place objects on top of the unit. Such objects may tip or fall over, and cause an injury.

When you remove the power cord, grip it by the plug head. Never attempt to disconnect the cord from the outlet by pulling on the cord. Doing so might expose or break the core leads, damage the power cord, and cause fire or electrical shock.

Keep the area around the power outlet clear of all obstacles so that you can disconnect the power cord easily at all times.

Never spill water or any type of volatile solution (alcohol, benzene, paint thinner) into the unit. Doing so might cause fire or electrical shock.

When the unit is not being used for a long time, disconnect the power cord from the power outlet.

Avoid wearing loose fitting clothing, dangling jewelry, long ties, or even long hair that could become entangled with moving parts, especially the rollers that feed the unit. If such objects become entangled, immediately disconnect the power plug from the power outlet to stop the unit.

Be very careful when you are loading a document or removing a paper jam. You may be injured unexpectedly. For example, the paper edges may cut your fingers.

Do not open the upper unit while the scanner is operating. Doing so might result in malfunction or injury.

Do not directly touch the pins and contacts on the scanner connector with your hands. Doing so might result in malfunction.

6Safety Precautions

Image 8 Contents
Instructions FCC Regulations For 120V models Introduction Filmer This UnitScanner Contents Specifications Options Consumables Chapter TroubleshootingChapter Daily Cleaning Safety Precautions Daily maintenanceSafety Precautions About the Installation Location About the Power Supply CarryingChapter Features of DR-5060F Packaging What’s in the Box? About DR-5060FNames and Functions of Parts Front viewInside with upper unit open Rear viewFunction keys Remaining film indicatorOperation panel Backup key Space/Trailer keyCount Only key New File keyIndicator lamps Start keyFeeding Option key Brightness keyFunction key labels Removable trayDocument eject support plate About the Camera Unit Preparation Before Use System Requirements Preparation Before Use Connecting to a ComputerConnecting the Scsi Cable Setting the Scsi ID and Terminator Setting the Scsi IDSetting the terminator Connecting the Power Cord and Ground Cable Connecting the power cordHandling the Camera Unit Loading FilmPress the release notch to open the camera unit’s cover Take the microfilm out of its caseClose the left cover taking care not to nip the film Preparation Before Use Affixing the Index Label Close the cover, and make sure that it is lockedLoading the Camera Unit in the DR-5060F Push the camera unit down onto the main unitRemoving the Camera Unit Removing Film Press the release notch to open the cover on the rightRemove the film Store the film in its case Document tray extension Preparing for Paper Feed and EjectAffixing the Document Guide Labels Open the extension wire Document eject tray extensionDocument eject support plate Paper Feed Adjustment Turning the Power ON/OFF Turning the Power onTo turn this unit ON, press the power switch Turn the computer onTurning the Power OFF Turn the computer OFF before you turn the scanner OFFPreparing Documents Checking the Operation Mode Backup key lit Backup modeBackup key out Scanner Only mode Backup key blinking Filmer Only modeCount Only key lit Count Only mode When counting ends, press the Count Only key to cancelCount Only mode Preparing DocumentsAbout Documents Types of DocumentsDocument Loading Precautions Setting Scan Conditions Selecting the Feeding Option Remote Is lowered when scanning of all pages in the document ends Semi-AutoSemi-Auto Inserted first into the scannerAuto Sensor Manual Insert the document one page at a time To end scanning, press the Stop keyFunction Key Settings Press the blinking function key again Manual Thickness AdjustmentPress the or key to adjust the paper thickness Fixed Thickness Mode Double Feed DetectionRestore Memorized Setting ImprinterFilm Density Odometer IndicationSetting in the User Mode User Mode Setup ItemsEndorser stamp mode setting Space feed settingLeader feed setting Trailer settingHow to Set the User mode Select the user mode address using the or keyWhen the final letter of the user mode setting is a number When the final letter of the user mode setting isTroubleshooting When the Scanner is Not Recognized Troubleshooting Removing Paper JamsPaper Jam in the Paper Eject Section Eject tray extension if it is openPage Paper Jam in the Feed Section Check the intermediate unit for jammed paperPress the open/close button, and lift up the feed unit Remove the jammed paper from the feed sectionGently close the upper unit Removing the Intermediate Unit Attaching the Intermediate Unit Push the intermediate unit downPaper Feed Trouble Condition Paper jam has occurredCondition Double feed cannot be detected When the Scanned Image is Not Normal Cause Scanning glasses and rollers on the scanner are dirtyCause Scan conditions are inappropriate Cause Driver or application does not run correctlyWhen an Error Code is Displayed Cause Optional imprinter’s ink cartridge is not installed Cause Endorser option connection errorCause Lamp has reached the end of its service life Cause Document was skewedDaily Cleaning Daily Cleaning Cleaning the Main UnitCleaning the Scanning Glasses and Rollers Daily CleaningOpen the feed unit Use a clean, dry cloth to wipe the scanning glasses Lower the lever Press this part Fit into Deeper Two grooves Memo Cleaning the Camera Unit Power CordImprinter Guide Plate Specifications SCSI-IICamera unit Endorser ED600Imprinter Bar code decoderPage CANON Electronics INC
Related manuals
Manual 92 pages 34.67 Kb