Dimensions |
|
with tray closed | 447 (H) x 535 (W) x 671 (D) mm |
| [17.5 (H) x 20.8 (W) x 26.1 (D) in] |
with tray open | 486 (H) x 535 (W) x 839 (D) mm |
| [18.9 (H) x 20.8 (W) x 32.7 (D) in] |
Weight | Approx. 48 kg (105.8 lb.) |
Power requirement | AC 120 V (240 V in Europe) (50/60 Hz) |
Power consumption | 220 W |
Noise | Less than 70 dB |
Operating environment | Temperature: 10°C to 32.5°C (50°F to 90.5°F) |
| Humidity: 20% to 80%RH |
Options
Camera unit 57X
This camera unit is for photographing documents in the duplex mode with the 1/57 magnification lens.
Camera unit 24X
This camera unit is for photographing documents in the simplex mode with the 1/24 magnification lens.
Endorser ED600
Attached on the main unit, this endorser stamps an
Imprinter 5000
Attached inside the main unit, this imprinter prints characters such as counter numbers, alphabet characters and symbols on the front side of the document while it is being scanned.
Bar code decoder 5000
This control board is mounted inside the main unit, and reads and recognizes bar codes in the document.
Patch Code/Function Sheet Detector
This control board is mounted inside the main unit, and reads and recognizes patch codes in the document. It also recognizes function sheets slotted in between document sheets to automatically switch to the desired scan mode.
NOTE
The bar code decoder cannot be mounted at the same time as the patch code/ function sheet detector. For details, contact your store of purchase or a Canon service department.
Consumables
Microfilm CK III
●For details on options and consumables, contact your agent or a Canon service department.
●Specifications are subject to change without notice.
Specifications 83