■How to Set the User mode
<When the final letter of the user mode setting is a number>
Scanner
A
1 Hold down [A] key for at least five seconds.
The [A] key blinks, and the user mode appears on the counter display.
2
3
4
Select the user mode using the 
or 
key.
Press the [A] key to select the mode (last number) to be used. Press the Clear/Stop key.
This sets the selected mode, and returns the counter display to the counter display.
<When the final letter of the user mode setting is “–”>
Scanner
A
1 Hold down [A] key for at least five seconds.
The [A] key blinks, and the user mode appears on the counter display.
2 Select the user mode address using the 
or 
key.
For setup items U11 to U14,
3
4
5
6
Press the [A] key to display the setting value.
Change the setting value using the 
or 
key.
Press the [A] key to redisplay the user mode.
Press the Clear/Stop key.
This sets the selected mode, and returns the counter display to the counter display.
58Setting Scan Conditions