■Auto
1 Before you press the Feeding Option key on the operation panel
to light [Auto] lamp, place one sheet of the document on the document tray and set the paper guide for the width of the document you are going to scan.
Feeding Option |
Manual |
Auto |
NOTE
If Feeding Option is set to [Auto] in the Filmer Only mode, scanning is started once the sensor detects the document placed on the document tray. Before you press the Feeding Option key on the operation panel to light [Auto] lamp, set the paper guide for the width of the document you are going to scan.
2
3
Remove any pages from the document tray, and press the Feeding Option key to light the [Auto] lamp.
If the scanner is in the Backup mode or Scanner Only mode, instruct start of scanning from the application.
The Start key changes color from red to green.
MEMO
Details of scan conditions are set on the application. For details, refer to the separate “ISIS/TWAIN Driver Instructions” or “Scanning Utility 5060 Instructions.”
4 Load the document face up on the document tray with its top edge inserted first into the scanner.
Feeding Option |
Manual |
Auto |
48Setting Scan Conditions