Canon DR-5060F manual About the Installation Location

Page 9

About the Installation Location

More than

100 mm (39.0 in.)

771 mm (30.0 in.) (with document tray extension, extension wire closed)

More than 100 mm (39.0 in.)

More than 740 mm (28.8 in.)

More than

100 mm (39.0 in.)

936 mm (36.5 in.) (with document tray extension, extension wire open)

For operation, maintenance and ventilation, make sure that there is enough space around the scanner as shown in the illustration above.

Do not place the unit in the following places. Doing so might cause malfunction or machine trouble, and adversely affect the unit or your personal computer.

Places subject to direct sunlight

If installation in such places is unavoidable, provide a curtain or similar object to shade the unit.

Places subject to dust and fumes.

Dust and cigarette fumes adversely affect the components inside the unit.

Places subject to high temperature and humidity such as near running water, a heat source, water vapor, or in an area such as a laboratory exposed to ammonia gas, paint thinner, or other volatile solutions.

Places subject to vibration and strong shock

Places subject to rapid changes in temperature or humidity

Condensation occurring inside the unit may impair scan image quality. Place the scanner in a room that is well within the following range:

Room temperature 10°C to 32.5°C (50°F to 90.5°F) Relative humidity 20% to 80%RH

Near electronic equipment or heavy equipment that generates a strong magnetic field such as speaker, TV and radio.

Safety Precautions 7

Image 9 Contents
Instructions FCC Regulations For 120V models Introduction This Unit ScannerFilmer Contents Chapter Troubleshooting Chapter Daily Cleaning Specifications Options Consumables Daily maintenance Safety PrecautionsSafety Precautions About the Installation Location Carrying About the Power SupplyChapter Features of DR-5060F About DR-5060F Packaging What’s in the Box?Front view Names and Functions of PartsRear view Inside with upper unit openRemaining film indicator Operation panelFunction keys Space/Trailer key Backup keyCount Only key New File keyStart key Indicator lampsFeeding Option key Brightness keyRemovable tray Document eject support plateFunction key labels About the Camera Unit Preparation Before Use System Requirements Connecting to a Computer Connecting the Scsi CablePreparation Before Use Setting the Scsi ID Setting the Scsi ID and TerminatorSetting the terminator Connecting the power cord Connecting the Power Cord and Ground CableLoading Film Handling the Camera UnitPress the release notch to open the camera unit’s cover Take the microfilm out of its caseClose the left cover taking care not to nip the film Preparation Before Use Close the cover, and make sure that it is locked Affixing the Index LabelPush the camera unit down onto the main unit Loading the Camera Unit in the DR-5060FRemoving the Camera Unit Press the release notch to open the cover on the right Removing FilmRemove the film Store the film in its case Preparing for Paper Feed and Eject Affixing the Document Guide LabelsDocument tray extension Document eject tray extension Open the extension wireDocument eject support plate Paper Feed Adjustment Turning the Power on Turning the Power ON/OFFTo turn this unit ON, press the power switch Turn the computer onTurn the computer OFF before you turn the scanner OFF Turning the Power OFFPreparing Documents Backup key lit Backup mode Checking the Operation ModeBackup key out Scanner Only mode Backup key blinking Filmer Only modeWhen counting ends, press the Count Only key to cancel Count Only key lit Count Only modeCount Only mode Preparing DocumentsTypes of Documents About DocumentsDocument Loading Precautions Setting Scan Conditions Selecting the Feeding Option Remote Semi-Auto Is lowered when scanning of all pages in the document endsSemi-Auto Inserted first into the scannerAuto Sensor Manual To end scanning, press the Stop key Insert the document one page at a timeFunction Key Settings Manual Thickness Adjustment Press the or key to adjust the paper thicknessPress the blinking function key again Double Feed Detection Fixed Thickness ModeImprinter Restore Memorized SettingFilm Density Odometer IndicationUser Mode Setup Items Setting in the User ModeSpace feed setting Endorser stamp mode settingLeader feed setting Trailer settingSelect the user mode address using the or key How to Set the User modeWhen the final letter of the user mode setting is a number When the final letter of the user mode setting isTroubleshooting When the Scanner is Not Recognized Removing Paper Jams TroubleshootingPaper Jam in the Paper Eject Section Eject tray extension if it is openPage Check the intermediate unit for jammed paper Paper Jam in the Feed SectionRemove the jammed paper from the feed section Press the open/close button, and lift up the feed unitGently close the upper unit Removing the Intermediate Unit Push the intermediate unit down Attaching the Intermediate UnitCondition Paper jam has occurred Paper Feed TroubleCondition Double feed cannot be detected Cause Scanning glasses and rollers on the scanner are dirty When the Scanned Image is Not NormalCause Scan conditions are inappropriate Cause Driver or application does not run correctlyWhen an Error Code is Displayed Cause Endorser option connection error Cause Optional imprinter’s ink cartridge is not installedCause Lamp has reached the end of its service life Cause Document was skewedDaily Cleaning Cleaning the Main Unit Daily CleaningDaily Cleaning Cleaning the Scanning Glasses and RollersOpen the feed unit Use a clean, dry cloth to wipe the scanning glasses Lower the lever Press this part Fit into Deeper Two grooves Memo Power Cord Cleaning the Camera UnitImprinter Guide Plate SCSI-II SpecificationsEndorser ED600 Camera unitImprinter Bar code decoderPage CANON Electronics INC
Related manuals
Manual 92 pages 34.67 Kb