Count Only mode setting (See “Count Only key lit: Count Only mode” P. 41)
Sets use of the imprinter/endorser in the Count Only mode.
Endorser stamp mode setting
Sets the endorser mode.
Space feed setting
Sets the space feed amount. Set in 5 mm (0.2 in.) increments within the range 5 mm to 1500 mm (0.2 in. to 58.5 in.).
U11–
Leader feed setting
Sets the leader film feed amount. Set in 100 mm (3.9 in.) increments within the range 500 mm to 3000 mm (19.5 x 117 in.).
U12–
Trailer setting
Sets the trailer film feed amount. Set in 100 mm (3.9 in.) increments within the range 500 mm to 3000 mm (19.5 x 117 in.).
U13–
Film end detection amount setting
Sets the film end detection amount. Set in 100 mm (3.9 in.) increments within the range 1500 mm to 2100 mm (58.5 in. to 81.9 in.).
U14–
MEMO
The setting value for the film end detection amount is for when Canon CK III film (5 mm (0.2 in.) thick) is used. Double this setting value when 2.5 mm (0.1 in.) film is used.
Backup mode setting
Sets use of the Scanner Only mode.
MEMO
●Setup items U5 to U9 are available only when the corresponding optional device is attached.
●For setup items U11 to U14,
3
Preparing Documents
Setting Scan Conditions 57