(3) Backup key
This key displays and changes the scanner operation mode:
Lit (Backup mode): In this mode, scanned images are being photographed on microfilm while they are being transferred to computer.
Out (Scanner Only mode): In this mode, scanned images are not photographed to microfilm.
Blinking (Filmer Only mode): In this mode, scanned images are not transferred to computer, and are only photographed to microfilm.
The default setting for this scanner is the Backup mode. Pressing this key turns the lamp in the key OFF and sets the scanner to the Scanner Only mode, and holding this key down for five seconds sets the scanner to the Filmer Only mode.
(4) Space/Trailer key
This key is enabled when the camera unit is placed on this unit. Pressing this key takes up spaces on the film. Holding this key down for three seconds feeds the trailer film so that the film can be taken out of the camera unit. During taking up of spaces and feeding of trailer film, the rightmost LED on the remaining film indicator blinks and the Start key turns to red.
(5) Count Only key
Pressing this key lights the lamp in the key and sets the Count Only mode. In this mode, document pages that are fed are neither scanned nor photographed. They are only counted. For details on this mode, see page 41 “Count Only mode.”
(6) New File key
Pressing this key notifies the scanner and filmer of a new file.
When you press this key and start scanning the next document, the images sent to the computer are saved in a different folder or under a different name to the previously scanned document, and the file mark is photographed on the film to indicate a new file.
MEMO
In the Backup mode and Scanner Only mode, the image to be saved or the new file mark is controlled according to the settings on the application. For details on application settings, refer to the separate “ISIS/TWAIN Driver Instructions” or “Scanning Utility 5060 Instructions.”
(7) Clear/Stop key
This key is used to stop scanning midway, cancel the operation mode you have set, and to cancel errors displayed on the counter display.
Holding this key down for at least two seconds clears the count displayed on the counter display. If the counter display is set for odometer indication, the currently displayed odometer value is cleared. If the counter display is set for file address indication or page address indication, both the file address and page address are cleared.
1
About DR-5060F
Names and Functions of Parts 15