Condition | Double feed cannot be detected. |
Cause and remedy | Double feed detection is not possible on documents 130 |
| mm (5.1 in.) wide or less even if double feed detection is set |
| to ON. |
Condition | Skew error occurs even though paper is not being fed |
| at an angle. |
Cause and remedy | This error occurs when the area 5 mm (0.2 in.) from the top |
| edge of the original contains text or pictures or the original |
| has a dark background. If this error occurs, turn skew |
| detection OFF and scan the document again. Or, make a |
| copy of the document on different paper, provide a wider |
| margin around the document (or lighten the background), |
| and scan the document again. |
Condition | When the imprinter is used, the document becomes |
| dirty. |
Cause and remedy | This is because ink is sticking to the holes on the guide |
| plate on the inside of the imprinter. Clean these holes with a |
| cotton wool bud. |
|
|
4
Troubleshooting
Paper Feed Trouble 69