Names and Functions of Parts
This section describes the names and functions of each part. Before you connect the
■Front view
Document eject tray extension/stopper
Select the document eject tray extension matched to the size of document you are scanning.
(See “Document eject tray extension” P. 34)
Document eject tray
After a document is scanned, it is ejected onto this tray.
Operation panel
This panel is for setting up scan density and other basic functions.
The number of scanned pages and error codes are also displayed here.
(See “Operation panel” P. 14)
Camera unit slot
This slot is for inserting the camera unit.
Camera unit lock lever
This lever is for locking the camera unit.
Power switch
Upper unit open/close button
Upper unit
Document sensor
This sensor detects documents placed on the document tray.
Document tray extension/ extension wire
Select the document tray extension matched to the size of document you are scanning.
(See “Document tray extension” P. 33)
Document tray | Document guide |
Load the document | Set the paper guide for the |
in this tray. | width of the document you |
| are going to scan. |
12Names and Functions of Parts